Mattes61 wrote:
Hello,
I think you connected with FPort, because you didn't mention anything - regardless, is it the same problem as with failsafe as you described before? Isn't it responding anymore? For me, when I go to the integration menu, I also get sensor lost and then sensor recovered again - but then everything works again for me - (Horus X10S Express or TX16S) - What Version of Ethos do you have on your Tandem X20 ?
My actual version is 1.44 -
Regards
Matthias
PS.
When you reconnect the battery does the Spirit initialize correctly or does the swashplate nod and you have to look at the flight log first?
No, I checked, the Archer receiver is set to S.Port, not F.port. I'm running Ethos 1.4.2.
I don't think this is a Failsafe issue (I haven't looked into that for some time now. The problem, was with the DSMx satellite. I'm not sure if there was something set in it, but if I pulled the sat out of the Spirit and let the Spirit initialize on it's own, the swash would always initialize level, not tilted forward.
When I changed to the Archer receiver I had to change the receiver type in the Spirit settings and re-assign the channels, and the ESC settings, but everything else remained, so there was something weird about the DSMx satellite, but now I have no issues with initialization.
I will try version 1.4.4 and see if there's any improvement on the integration. If not I hope Thomas comes through with his updated LUA scripts, as promised.
Update:I updated the radio to version 1.4.4, but I can't see any improvements as far as integration is concerned. The radios that don't currently have integration, still don't, so I think the fixes need to be done on the LUA side of things, not Ethos.
Has anyone seen any updated LUA scripts for Spirit?