It is currently Thu 28. Mar 2024 22:44:23

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 24. Feb 2021 17:01:46 
Offline

Joined: Thu 04. Feb 2021 11:19:24
Posts: 23
Hallo ,

ich bin sehr zufrieden mit dem FBL aber ich habe jetzt ein bischen Flugverhalten wie ein Roboter bei Nick und Quer eingaben .

Wo muss ich den Stellen um es weicher zu machen


I am very satisfied with the FBL, but I now have a bit of flight behavior like a robot on Nick and Quer.



LG


Top
 Profile  
 
PostPosted: Thu 25. Feb 2021 16:04:56 
Offline

Joined: Thu 27. Sep 2018 8:07:44
Posts: 43
Location: Tirol
Was hast du bei Flight Style im Reiter Allgemein eingestellt?

http://manual.spirit-system.com/index.p ... lgemein.29

LG
Tino


Top
 Profile  
 
PostPosted: Fri 26. Feb 2021 9:16:04 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

please verify that Geometry 6° parameter was configured correctly.
If too high, this can cause described behavior.

If it is correct, please increase Elevator Filter value.

If it will still not be enough, decrease Cyclic Feed Forward value, for example to 3-4.

I believe this will help.


Hallo,

Bitte überprüfen Sie, ob der Parameter Geometrie 6 ° korrekt konfiguriert wurde.
Wenn dies zu hoch ist, kann dies zu einem beschriebenen Verhalten führen.

Wenn es korrekt ist, erhöhen Sie bitte den Wert des Aufzugsfilters.

Wenn dies immer noch nicht ausreicht, verringern Sie den Wert für die zyklische Vorwärtskopplung, z. B. auf 3-4.

Ich glaube, das wird helfen.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 01. Mar 2021 17:12:06 
Offline

Joined: Thu 04. Feb 2021 11:19:24
Posts: 23
onit12 wrote:
Was hast du bei Flight Style im Reiter Allgemein eingestellt?

http://manual.spirit-system.com/index.p ... lgemein.29

LG
Tino


Hallo ,

ich bin bei Flight Style 8

lg


Top
 Profile  
 
PostPosted: Mon 01. Mar 2021 17:12:41 
Offline

Joined: Thu 04. Feb 2021 11:19:24
Posts: 23
ZeXx86 wrote:
Hello,

please verify that Geometry 6° parameter was configured correctly.
If too high, this can cause described behavior.

If it is correct, please increase Elevator Filter value.

If it will still not be enough, decrease Cyclic Feed Forward value, for example to 3-4.

I believe this will help.


Hallo,

Bitte überprüfen Sie, ob der Parameter Geometrie 6 ° korrekt konfiguriert wurde.
Wenn dies zu hoch ist, kann dies zu einem beschriebenen Verhalten führen.

Wenn es korrekt ist, erhöhen Sie bitte den Wert des Aufzugsfilters.

Wenn dies immer noch nicht ausreicht, verringern Sie den Wert für die zyklische Vorwärtskopplung, z. B. auf 3-4.

Ich glaube, das wird helfen.


danke ich werde es testen


Top
 Profile  
 
PostPosted: Mon 01. Mar 2021 17:27:11 
Offline

Joined: Tue 25. Jul 2017 20:33:40
Posts: 101
Location: Southern Bavaria
I'm flying my 550 Tarot with Flightstyle at "4".

The "8" I use to "calm down" a 4-bladed 500 Align helicopter


Top
 Profile  
 
PostPosted: Wed 31. Mar 2021 15:00:47 
Offline

Joined: Thu 07. May 2020 9:50:45
Posts: 17
Hi

die 6 Grad Einstellung hat sehr hohen Einfluss auf das Digitale Verhalten was du beschreibst.

Wenn es zu digital ist, spricht auch nichts dagegen nur 5 Grad einzustellen.

Ansonsten wie schon geschrieben den zyklischen Vorwärtsschub reduzieren und nicht soviel TS Empfindlichkeit fliegen ( max 60%)

VG
Timo


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .