It is currently Thu 28. Mar 2024 10:48:43

All times are UTC + 1 hour





Post new topic Reply to topic  [ 2 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Fri 09. Oct 2020 20:09:07 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
New version 3.2.0 released!

  • Brand new Quick Flashing Process:
    • From now you can flash new firmwares more smoothly, faster and reliable.
    • Firmware flashing can take just 7 seconds!
    • Once flashed, new firmware will boot up instantly with no need for re-power.
    • All settings are preserved as usually.
    • New Flashing Procedure will take effect after 3.2.0 update. Then next updates will be much faster.
    • Incorrect firmware flashing is not possible anymore.
    • NOTE: Transition from older firmwares is the most important to complete properly.
    • NOTE: Make sure that your computer can flash firmwares properly prior this upgrade. This is required only for this update, since old flashing method is still used (only first time).
    • NOTE: We recommend for Mac OS X users to make this transition on a Windows or Linux computer due to known driver issues. After this update, updating with Mac will be perfectly safe.
    • NOTE: If you want to downgrade to an older version, it is possible to obtain old compatible version upon request. Original old firmwares will not work.
  • New easy Recovery mode:
    • In case that firmware flashing was interrupted for whatever reason, Spirit unit will boot up in recovery mode automatically.
    • You can finish the flashing once unit will start to blink with LED quickly.
    • Enter Recovery Mode when Status LED is blinking quickly, select firmware and just press the Flash button.
  • Futaba SBUS/SBUS2 enhancement:
    • Each data frame is examined to match correct time synchronization.
    • Additional protection from corrupted packets.
  • Support for three SRXL2 satellites:
    • From now Spirit 2, Spirit RS, Spirit Pro and µSpirit units can be interfaced with additional satellites.
    • You can connect them at the satellite ports with SRXL2-satellite adapter.
    • NOTE: We still recommend to use full size receiver + satellite receiver together.
  • Improved Spektrum Integration:
    • Entering and closing the Integration menu is now more intuitive.
    • Only once menu is completely closed with sticks, you will see CLOSED label.
    • During closing you will see CLOSING label.
  • Improved detection of SPM4649T receiver:
    • Receiver is now detected properly so that integration should work always well with all Spektrum radios.
  • Spektrum DSM2/X protocol:
    • Spektrum satellites are switched faster on signal loss.
    • Temporal signal loss during satellite switch is only 100ms long.
  • JETI telemetry tweak:
    • S RPM parameter has RPM extension after value.
    • This can be usefull for voice speech output.
  • HobbyWing ESC telemetry:
    • Temperature will corelate with ambient ESC temperature now.
  • µSpirit - Rudder ESC motor:
    • Motor will turn on immediately when Throttle function is assigned and Low RPM parameter is configured.
  • New Anti-Gravity feature:
    • This feature is modifying Collective Pitch steering to gain lighter feeling of the model.
    • When model is skids down, bottom half of the pitch has not that impact. Model will not descend that quickly.
    • In other words with 50% value you will obtain +12° but only -6° for negative side.
    • This is especially useful for smaller helicopters of 250 class and smaller.
    • This parameter is not changing Collective Pitch range. So you do not have to make any other adjustments.
    • New parameter is located in the Expert Settings.
  • GeoLink features and Rescue mode:
    • From now Rescue Duration parameter will take effect with GeoLink features engaged.
  • Spirit Settings - Messages:
    • Spirit Settings software will let you know what is needed to do in unusual scenarios (Version Mismatch, Updating)
  • Spirit Settings - Log Viewer:
    • Fixed problem with a non standard Documents directory location.
    • Logs should always open whenever Documents directory is located.
  • Spirit Settings - In-Flight Vibration Analysis:
    • Vibration Analysis can be selected for any Special Function.
    • Previously only first 3 Special Function assignments allowed to see In-Flight option in the Analysis window.

No need to change any parameter after update from version 3.1.

WARNING: Make sure that your computer can flash firmwares properly prior this upgrade. This is required only for this update, since old flashing method is still used (only first time).
WARNING: We recommend for Mac OS X users to make this transition on a Windows or Linux computer due to known driver issues. After this update, updating with Mac will be perfectly safe.

NOTE: This update must be performed with Spirit Settings 3.2.0.

Update for the Spirit units, Wifi-Link, JETI integration, OpenTX integration is available in our Download section.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 26. Nov 2020 14:21:20 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
New version 3.2.1 released!
  • Quick Flashing Process update:
    • Updated instructions in the Spirit Settings after Flashing process.
    • In case flashing will not start normally, the software will repeat the process.
  • Futaba SBUS enhancement:
    • Improved compatibility with some FrSky receivers.
  • Spektrum DSM2/X protocol:
    • Improved compatibility with some Spektrum DSM2/X satellites for easier binding process.
  • Rescue mode - Rescue Duration:
    • When model is upside down and Rescue Duration passed, collective pitch steering is in the right direction in all cases.
  • Stabilisation and GeoLink modes enhancement:
    • When Stabi Correction feature is turned Off model can fly precisely with even higher vibrations.
  • GeoLink logging:
    • New possibility to turn off GeoLink logging in the GeoLink window/Module tab.
    • When logging is turned off, module can sustain higher electrostatic discharges.
    • By default Logging will be disabled starting with this update.
  • Spirit Settings - Setup Wizard:
    • Added new Tron 5.5 model preset.

No need to change any parameter after update from version 3.2.0.

Update for the Spirit units, GeoLink is available in our Download section.

WARNING: Update from 3.1.0 and older - Make sure that your computer can flash firmwares properly prior this upgrade. This is required only for this update, since old flashing method is still used (only first time).
WARNING: Update from 3.1.0 and older - We recommend for Mac OS X users to make this transition on a Windows or Linux computer due to known driver issues. After this update, updating with Mac will be perfectly safe.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .