It is currently Fri 01. Nov 2024 0:31:42

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Telemetry Cable
PostPosted: Tue 02. May 2017 16:19:59 
Offline

Joined: Thu 14. Jan 2016 23:25:16
Posts: 12
Tomas,

What is in the cable for the HW and scorpion ESCs?

I have the connectors so I can make it, but does it have a pull up resistor or some other passive components in it?

Thanks,
schu


Top
 Profile  
 
 Post subject: Re: Telemetry Cable
PostPosted: Wed 03. May 2017 7:17:15 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12433
Hello,

Telem UNI is working only as adaptor.
You will need to solder signal and ground cables together. But + lead (red) must be disconnected on both sides - very important.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Telemetry Cable
PostPosted: Wed 03. May 2017 15:58:21 
Offline

Joined: Thu 14. Jan 2016 23:25:16
Posts: 12
Sorry Tomas, that doesn't make sense to me. I get removing the +lead as you don't need power from the telemetry, but I don't understand solder ground and signal together. If signal is pulled to ground before the spirit how do you get any bits?


Top
 Profile  
 
 Post subject: Re: Telemetry Cable
PostPosted: Wed 03. May 2017 16:02:44 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12433
Sorry for confusion.

I meant it in this way:
Servo orange <-> JST orange
Servo brown <-> JST brown

So there will be just two wires.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Telemetry Cable
PostPosted: Wed 03. May 2017 17:55:16 
Offline

Joined: Thu 14. Jan 2016 23:25:16
Posts: 12
Oh, in that case I highly recommend that you update the wiki to mention that for non-castle telemetry you can use a servo extension with the red wire removed so that people can make their own cable without needing to wait for a cable to come from the store.

Thanks,
schu


Top
 Profile  
 
 Post subject: Re: Telemetry Cable
PostPosted: Wed 03. May 2017 18:24:47 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12433
We are shipping the cables each day, they will be in stock for longer time in the following days.
But the point of the Telem cables is, that we recommend to use them, since they are tested and will work with no modification.
So there is no risk that you can't damage anything.
Next thing is that it can at least partially pay for the cost and development of the ESC telemetry.
So by this way, you can support our work and we can make further improvements.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Telemetry Cable
PostPosted: Wed 03. May 2017 20:59:17 
Offline
User avatar

Joined: Wed 20. Jan 2016 20:23:36
Posts: 17
Location: DFW Texas
I ordered three cables, even though I can make them, and I thank you for your efforts. They were reasonably priced as well. :)

thank you,

Dan (Spirit Pro x 3)

_________________
Synergy 516, 556 stretch, 696.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .