|
It is currently Tue 15. Oct 2024 6:33:38
|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 3 posts ] |
|
Author |
Message |
HeliMLM
|
Posted: Tue 25. Jan 2022 9:55:02 |
|
Joined: Tue 10. Mar 2020 14:36:22 Posts: 369
|
Hello all,
i have updated a Spirit II with Spirit Aero current firmware and had no trouble setting it up for the first time (it was great to setup). everything seems to work fine - maiden waiting for better weather.
tiny problem: Hobbywing telemetry is working, but it seems to give a max reading of 8192 rpms for the motor... which is a bit above ~2/3 throttle or so. above that, the motor is still accelerating as expected (to >10.000rpms) - everything normal here. just the telemetry rpm readings seem to max out at 8192. what did i miss in setup?
the Esc is a HW 80A v4, setup: fixed wing, 3S fixed, soft cutoff/disabled, brake disabled, etc ...
_________________ cheers Michael
|
|
Top |
|
|
ZeXx86
|
Posted: Thu 10. Feb 2022 9:16:29 |
|
|
Site Admin |
Joined: Mon 29. Apr 2013 16:06:44 Posts: 12401
|
Hello,
you have to set motor poles, since 8192 is max. value that can be displayed for RPM. So it can't display higher values.
_________________ Spirit System developer
|
|
Top |
|
|
HeliMLM
|
Posted: Thu 10. Feb 2022 9:58:37 |
|
Joined: Tue 10. Mar 2020 14:36:22 Posts: 369
|
Hello Tomas,
motor poles is set correctly (10 pole motor => 5 set in config)... motor is spinning ~10.800 at full throttle (from older logs with YGE esc directly on Ex Bus). so this means, i cannot see real rpms via telemetry?
_________________ cheers Michael
|
|
Top |
|
|
|
Page 1 of 1
|
[ 3 posts ] |
|
|
Who is online |
|
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|