It is currently Thu 28. Mar 2024 18:56:24

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Fri 27. Aug 2021 19:15:38 
Offline

Joined: Fri 27. Aug 2021 19:05:14
Posts: 3
Hello,

I bought the Spirit and it is working well. But where I am struggling is, when I switch to a bank where the Anti Gravity is switched on,
the helicopter is moving from hovering much upwards. That I did not like.

What can I do to have no movement in the hovering position?

Best Regards
Andreas


Top
 Profile  
 
PostPosted: Sat 28. Aug 2021 8:19:08 
Offline

Joined: Fri 01. Nov 2019 13:32:19
Posts: 40
Location: Munich, Germany
Hi,

could you please send the output of the compare banks in the 'Backup' menu?

Thanks


Top
 Profile  
 
PostPosted: Sat 28. Aug 2021 12:07:32 
Offline

Joined: Fri 27. Aug 2021 19:05:14
Posts: 3
Hi,
I have 3 banks installed.
First bank have no Antigravity (Value is zero)
Second and third bank have the value of 30

When I switch from Bank 0 to first bank, Heli jumps upward from hovering position.
Sometimes I am fast enough to compensate the climbing.
Greating
Andreas


Top
 Profile  
 
PostPosted: Sun 29. Aug 2021 8:10:18 
Offline

Joined: Fri 01. Nov 2019 13:32:19
Posts: 40
Location: Munich, Germany
other values are the same on all banks?


Top
 Profile  
 
PostPosted: Fri 10. Sep 2021 8:19:29 
Offline

Joined: Sat 24. Oct 2015 19:06:03
Posts: 61
What you describe is normal. Anti-gravity adjusts the collective pitch centre point depending on the orientation of the heli. So when upright it adds positive collective and when inverted it adds negative. As the instructions point out, for most helis this should be left as zero. for small helis, heavy helis or low headspeed you might find that using a little makes the heli feel 'lighter' to fly. 30% is too much, I'd suggest starting with no more than 10%.

The heli will tend to climb when you engage anti-grav but if you use a lower % the effect is less dramatic and easier to compensate for. If you want no change between banks then leave anti-grav at zero, or use the same value in each bank.


Top
 Profile  
 
PostPosted: Fri 10. Sep 2021 9:08:08 
Offline

Joined: Sun 28. Mar 2021 10:43:14
Posts: 17
With the vstabi, a kind of "fade in" for the antigravity value was introduced with the last update, which means that when switching between two banks, the pitch difference is approached slowly. Maybe this can also be implemented in the Spirit? :?:


Top
 Profile  
 
PostPosted: Fri 10. Sep 2021 12:49:31 
Offline

Joined: Sat 24. Oct 2015 19:06:03
Posts: 61
STC... wrote:
With the vstabi, a kind of "fade in" for the antigravity value was introduced with the last update, which means that when switching between two banks, the pitch difference is approached slowly. Maybe this can also be implemented in the Spirit? :?:


That's a great idea. I'll put it in the correct forum so it gets visibility


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .