It is currently Tue 18. May 2021 13:08:17

All times are UTC + 1 hour

Post new topic Reply to topic  [ 1 post ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Fri 21. Aug 2020 5:11:58 

Joined: Sat 28. Feb 2015 19:54:07
Posts: 4
I usually fly helicopters but I want to try an acro plane now.

I would like to set up three flight conditions:

FC1: gyro off (global gyro gain=0) for trim flights.

FC2: rate mode (Stabi disabled; global gyro gain < 0) for smooth flights in windy conditions and for landing. I read in one of the threads that landing with heading locked (HL) could cause bouncing of the plane during landing. So, would you recommend to land in rate mode to avoid this problem?

FC3: HL mode (global gyro gain > 0) for acro flights.

I also want to utilize the rescue feature in all three FCs. The rescue function should be activated through a separate switch.

For FC1: would the rescue work with global gyro gain =0, or do I have to set the gain to a positive number when pulling the rescue switch?

For FC2, my understanding is that the stabi function needs to be disabled in order to use rate mode. So, my plan is to switch the bank when the rescue switch is pulled. The other bank has the rescue mode enabled and I don't have to change the global gain from negative to positive, correct?
Does this work? Is there a significant delay or another problem when the stabi function is switched from disabled to rescue while using rate mode?

Thanks, Peter

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC + 1 hour

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .