| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Micro Spirit on 500 size https://www.spirit-system.com/phpBB3/viewtopic.php?f=35&t=3753 |
Page 1 of 1 |
| Author: | IronHide [ Tue 04. Feb 2020 11:45:38 ] |
| Post subject: | Micro Spirit on 500 size |
is there anyone who use micro spirit on 500 size heli? if so; how is it so far? |
|
| Author: | ZeXx86 [ Tue 04. Feb 2020 18:41:03 ] |
| Post subject: | Re: Micro Spirit on 500 size |
uSpirit on 500 class helicopter shouldn't be used. It is not recommended at all. |
|
| Author: | onepiece [ Tue 31. Mar 2020 5:06:44 ] |
| Post subject: | Re: Micro Spirit on 500 size |
Thinking about placing a uSpirit on a FLYBAR heli that swings 325mm blades. This is due to HORRENDOUSLY limited space inside the frame. Some folks might regard this as a 450 sized heli but the blades are significantly shorter than blades 500 class helis swing. Questions: -Will a uSpirit work in this scenario? - If not, I would need to mount a larger Spirit flybarless unit upside down on the bottom of the frame. If mounted in this orientation using the sticky mounting pad, I suppose a very small zip tie placed through soft flexible silicone tubing loosely-to moderately snugly tightened (the zip tie) would be necessary to provide needed security against losing the unit in flight. Thoughts ? Thank you. |
|
| Author: | ZeXx86 [ Wed 01. Apr 2020 9:32:15 ] |
| Post subject: | Re: Micro Spirit on 500 size |
Hello, uSpirit can handle this, but we do not recommend it because you will need 4x JST-Servo adapters and possible current requirements can be too high. Using a bigger Spirit unit will be safer for sure. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|