It is currently Thu 28. Mar 2024 23:14:37

All times are UTC + 1 hour





Post new topic Reply to topic  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sun 02. Feb 2020 18:30:58 
Offline

Joined: Thu 16. Jan 2020 9:13:27
Posts: 19
Langsam verzweifele Ich
Bekomme Telemetrie Anzeige nicht hin,wer kann helfen.
MZ24 Pro
Spirit Pro
Gr18 als Fläche Programmiert,also als Normaler Empfänger
Hw 80A
Und Telemetriekabel im Spirit in Port ELE/PIT/AIL eingesteckt.

Gruß Jürgen


Top
 Profile  
 
PostPosted: Mon 03. Feb 2020 8:34:07 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

please let me know in which step you have problem from this guide:
http://manual.spirit-system.com/index.p ... gration/de

You have to enable telemetry in the receiver, maybe problem is there.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 03. Feb 2020 23:59:54 
Offline

Joined: Thu 16. Jan 2020 9:13:27
Posts: 19
Habe alles gemacht,aber mir wird nur die Drehzahl Angezeigt,und vom 6s Akku die Spannung.Aber weder Strom noch Kapa vom HW 80A V4.Muss ich irgendwo noch etwas einstellen.
Ist ja nicht mein erstet Spirit,aber das erste wo ich mir vom Regler die Telemetrie wegen Strom und Kapazität anzeigen lassen möchte.

Gruß Jürgen


Top
 Profile  
 
PostPosted: Wed 05. Feb 2020 23:20:06 
Offline

Joined: Thu 16. Jan 2020 9:13:27
Posts: 19
Hi Tomas
Habe dein Kabel Telemetrie Uni bekommen und angeschlossen,aber ohne Erfolg.Drehzahl und Akku 1 und Akku2 werden angezeigt mit 22,6V beide.Obwohl einer doch die BEC Spannung von 7.4 V sein soll.Nutze Hott im GAM Modus.


Top
 Profile  
 
PostPosted: Thu 06. Feb 2020 8:49:15 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

when your model has no blades, then current and capacity will be not shown.
HobbyWing ESC need enough load that is present only with main blades on, during normal flying.

So maybe if you are trying it in home you can't see current and capacity.
BEC Voltage must be visible properly immediately, but in other telemetry screen (there are multiple screens).

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 07. Feb 2020 20:58:09 
Offline

Joined: Thu 16. Jan 2020 9:13:27
Posts: 19
Hallo Tomas
Aber wie kann ich dann den Kapazität Grenzwert einstellen?


Top
 Profile  
 
PostPosted: Wed 12. Feb 2020 14:15:11 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

there is no capacity limit to set.
In the future firmware Alarm for Low calacity will be supported.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 12. Feb 2020 21:32:10 
Offline

Joined: Thu 16. Jan 2020 9:13:27
Posts: 19
Hi Tomas
Mit der Last um Stromwerte anzuzeigen über Telemetrie kann ich mir nicht vorstellen das dies mit dem Regler zu tun hat.Habe jetzt wieder Unisens montiert und es funktioniert.Ich bin der Meinigung die Software vom Spirit ist noch nicht in der Lage dies umzusetzen.Ist eigendlich schade,da ich mehrere habe und wollte eigendlich keine Unisens mehr verwenden um alles zu vereinfachen.
Hoffe es kommt bald,sonst muß man sich über Systemwechsel gedanken machen.

Vielleicht sollte man sich mal gedanken machen die Anleitung zuändern wo die Daten stehen welche Telemetriedaten die HW V4Versionen Anzeigen können,mit Spirit.Da ich von einigen erfahren habe das es Ihnen genau wie mir gegangen ist und zu riskant ist das man Strom erst bei Last angezeigt wird. Mit andern Unisrns oder Ilog geht es direkt.

Gruß Jürgen


Top
 Profile  
 
PostPosted: Thu 13. Feb 2020 9:56:32 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hi,

I am not sure if I understand correctly. But HobbyWing and Castle ESCs can display Current and Consumed capacity only with a load. Without main blades it will show almost always zero. It is normal for all HobbyWings and we can't do nothing about it from our side.
Other ESCs such as from Kontronik, Scorpion have no such limitation.

Manual was updated so people will know about this. It will be same with any system in these ESCs, including JLog.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .