It is currently Thu 28. Mar 2024 13:43:47

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Open source telemetry
PostPosted: Mon 14. Sep 2015 14:11:59 
Offline

Joined: Fri 19. Sep 2014 23:13:14
Posts: 16
Does the Spirit produce data at the Ail port when its configured to let say DSM2/X? It'll be nice if "we" non Jeti users can take advantage of real-time information too.


Top
 Profile  
 
PostPosted: Tue 15. Sep 2015 17:46:43 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
No, it does not.

Unfortunately Spektrum does not allow to use these data without special telemetry module. With it you are limited to few variables like RPM, voltage, temperature.
It is likely that in the future it will be possible.

At the moment only Jeti supports bi-directional transmission so it is possible to send and receive data within one protocol.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Tue 15. Sep 2015 19:29:33 
Offline

Joined: Fri 19. Sep 2014 23:13:14
Posts: 16
I was thinking if you can just make oneway data available on one of the free pins, no matter what rx system we use except of course jeti. It should not interfere with the spectrum rx anyway right?


Maybe a generic protocol that spits out telemetry data we can use out of one of the free pins.

Not necessarily for speKtrum but maybe for a DIY telemetry display

Thanks!


Last edited by gta18 on Wed 16. Sep 2015 1:13:02, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue 15. Sep 2015 21:01:41 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
This is possible, but there is unfortunately no way how it can be used practically.

It is not possible to show anything on the transmitter that does not support it.
So what I want to say is, that both sides must cooperate on this possibility.

With Jeti this cooperation was established so both sides were able to interface with each other.
With all other brands it is unwanted feature so manufacturers like Futaba, Spektrum, Graupner, JR are not allowing this. Only between their own devices.

There is possibility that one, next brand will start to cooperate, so it will be not only Jeti.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 21. Sep 2015 4:25:11 
Offline

Joined: Thu 31. Jul 2014 21:27:22
Posts: 215
What about Opentx?

I'm pretty sure it would be quite easy to do. Ardupilot currently supports full telemetry with Opentx.

You could probably even look at the opensource code from Ardupilot and Opentx and just convert it for the spirits operating system.


Top
 Profile  
 
PostPosted: Mon 21. Sep 2015 8:10:34 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Unfortunately OpenTX does not support functionality that is required, but they plan to implement it soon (according to their words).
Then it will be possible very well.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 24. Sep 2015 15:57:41 
Offline

Joined: Thu 31. Jul 2014 21:27:22
Posts: 215
ZeXx86 wrote:
Unfortunately OpenTX does not support functionality that is required, but they plan to implement it soon (according to their words).
Then it will be possible very well.


Excellent news!

Thank you


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .