It is currently Fri 29. Mar 2024 6:18:40

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 13. Apr 2015 18:58:30 
Offline

Joined: Sat 11. Apr 2015 18:07:33
Posts: 85
During setup, if I select "Pirouette optimization" it would be nice if you can remove the USB cable from the Spirit.
That way it is easy to turn the helicopter freely without cables attached.

If I do this and reconnect the USB cable, the software does not respond.
Restarting the application doesn't work.
(Windows 7 Ultimate, 64 bit.)

What I do is reboot my PC and disconnect/reconnect the lipo to my helicopter.
After that, all works again as expected.

No big deal, but maybe something to look into when time allows.

Thx!


Top
 Profile  
 
PostPosted: Mon 13. Apr 2015 19:09:02 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Thanks for your report. I hope we can fix it as it should work.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 13. Apr 2015 22:31:08 
Offline

Joined: Sun 25. Aug 2013 9:14:16
Posts: 226
I agree, it is a little bit tricky with cable connected

_________________
DX9 - Chase 360 - Spirit


Top
 Profile  
 
PostPosted: Mon 13. Apr 2015 22:48:50 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Under Linux it is working all the time, there is just problem on some Windows stations.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Tue 14. Apr 2015 22:02:46 
Offline

Joined: Sat 11. Apr 2015 18:07:33
Posts: 85
I can simulate the problem doing the following.

- Start the Spirit application with NO usb dongle and thus NO unit attached.
- The application wil ask: "Demo mode, Unit was not detected. Do you want to switch to demo mode?"
- Select NO.
- The software now looks unstable if you click the Update tab.
- A pop-up will tell you the connection is unstable.
- Click Exit.
- The app now freezes and shows (Not Responding.)
- The Windows Application Log shows an Error (Application Hang) with event ID 1002.

Code:
The program settings.exe version 0.0.0.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
 Process ID: 42c
 Start Time: 01d076f5debb06a0
 Termination Time: 1
 Application Path: C:\Program Files (x86)\Spirit Setings\settings.exe
 Report Id: 3f991614-e2e9-11e4-af88-005056c00008


Hope this helps.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .