It is currently Sun 13. Oct 2024 11:40:49

All times are UTC + 1 hour





Post new topic Reply to topic  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 16. Oct 2023 16:43:16 
Offline

Joined: Mon 16. Oct 2023 16:38:12
Posts: 6
Hi Guys

I got this Spirit II last year but it has never functioned right, I think? I just noticed it lately trying to do a setup on my gasser.
On my T-REX 500, I was able to cheat in the radio to get the 500 to fly, but not the greatest.

This is the problem that I have when I am in the recovery mode or setup wizard when I go to the limits page and adjust the pitch range, I can adjust all the pitch range I need and more, but once I'm unplugged for the PC and reboot the unit the pitch never goes past 5°no matter what I do, pitch curve 100%, servo endpoints 100% the only way I can get a bit of more pitch is to go past, 100% in the endpoints, I am getting up to about 7°, not enough, it was all right for the 500 but not enough for the gasser.

PS I also have a Spirit GT on my Goblin and it works perfectly happy with it, very happy!


Top
 Profile  
 
PostPosted: Mon 16. Oct 2023 17:27:35 
Offline

Joined: Wed 21. Dec 2016 15:13:38
Posts: 555
Location: Germany
Hello,
for help you must give a bit more detailed information -
What receiver, what transmitter, what protocoll etc.
Make some pictures from your setup in the spirit settings and/or crate a .4ds settings file of your configuration in the FBL.
Post the file here in the forum (attachment) -

Another question why have you not informed the costumer support that your FBL is not working correctly ? Why have you waited so long to do something about it?

Regards


Top
 Profile  
 
PostPosted: Mon 16. Oct 2023 23:04:10 
Offline

Joined: Mon 16. Oct 2023 16:38:12
Posts: 6
Receiver, Futaba R2008SB, Transmitter Futaba T14SG on 2.4 S-FHSS using S-Bus

"why have you not informed the costumer support that your FBL is not working correctly"
I had it on a T-Rex 500 and by cheating in the radio I got it to fly OK not great, I really noticed a problem when I wanted to set up my Gasser helicopter, that's when I saw the problem just lately, need more than five to seven degrees on the main blades to fly good, I all so have a Spirit GT on a Goblin 700 all most the same setup it is perfect!


Attachments:
spirit-log-2023-10-03-114340.pdf [59.21 KiB]
Downloaded 133 times
Top
 Profile  
 
PostPosted: Tue 17. Oct 2023 7:12:51 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12401
Hello,

please share your Spirit Settings file (4ds from Backup tab)
You shared only PDF log. The problem will be related just to the settings.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 19. Oct 2023 20:41:07 
Offline

Joined: Mon 16. Oct 2023 16:38:12
Posts: 6
Hello again, I put all the files I could find in the spirit file installed on my PC. Now how do I send them to you?
Do you have a current email address that I can use to send the file?

Thanks in advance
John McDonald


Top
 Profile  
 
PostPosted: Fri 20. Oct 2023 20:20:24 
Offline

Joined: Wed 21. Dec 2016 15:13:38
Posts: 555
Location: Germany
Hello,
save your settingsfile out of the Spirit Settings Program as you see here:
Attachment:
Screenshot 2023-10-20 211446.png
Screenshot 2023-10-20 211446.png [ 45.22 KiB | Viewed 1804 times ]

then load it up here in the forum as attachment:
Attachment:
Screenshot 2023-10-20 211954.png
Screenshot 2023-10-20 211954.png [ 49.14 KiB | Viewed 1804 times ]


Regards


Top
 Profile  
 
PostPosted: Sat 21. Oct 2023 22:10:43 
Offline

Joined: Mon 16. Oct 2023 16:38:12
Posts: 6
I am really not good with this PC stuff, I tried to download the files and I can't do it, if someone wants to do a screen share setup, give me a time and date and I'll set everything up, maybe we can get the information you need that way, if not, I will send the unit in, to Spirit to get a look at, I will pay the shipping it is better then a non-functioning unit.

Thanks John


Top
 Profile  
 
PostPosted: Mon 23. Oct 2023 17:14:26 
Offline

Joined: Wed 21. Dec 2016 15:13:38
Posts: 555
Location: Germany
Hello that's not rocket science, look at this:
Follow these steps:
Click on save
Attachment:
Screenshot 2023-10-23 175627.png
Screenshot 2023-10-23 175627.png [ 44.08 KiB | Viewed 1774 times ]

Enter a name
Attachment:
Screenshot 2023-10-23 180534.png
Screenshot 2023-10-23 180534.png [ 125.56 KiB | Viewed 1774 times ]

Click on save
Attachment:
Screenshot 2023-10-23 175843.png
Screenshot 2023-10-23 175843.png [ 117.17 KiB | Viewed 1774 times ]

Now in this folder is the file, here in my example C:\Program Files (x86)\Spirit Settings

That's all !


Top
 Profile  
 
PostPosted: Thu 26. Oct 2023 12:19:57 
Offline

Joined: Mon 16. Oct 2023 16:38:12
Posts: 6
All is good, it was the setup, me bad.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .