Spirit System https://www.spirit-system.com/phpBB3/ |
|
OMPHobby M4 ESC Telemetry https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=5664 |
Page 3 of 3 |
Author: | ZeXx86 [ Mon 04. Dec 2023 8:30:41 ] |
Post subject: | Re: OMPHobby M4 ESC Telemetry |
It is 22cm long. |
Author: | Konrad [ Mon 04. Dec 2023 14:42:16 ] |
Post subject: | Re: OMPHobby M4 ESC Telemetry |
I soldered the cable myself. I used a cable for Spektrum satellites and soldered on a 4-pin servo connector. This was left over from a Unisens-E. My cable is exactly the right length at 35cm. According to Spirit, the Spirit cable is only 22 cm long and therefore much too short. I have already pointed this out to Thomas. Perhaps Spirit will change the length. |
Author: | StatiC [ Tue 05. Dec 2023 19:42:55 ] |
Post subject: | Re: OMPHobby M4 ESC Telemetry |
Thanks for the info. Yea... that kind of defeats the purpose of buying a pre-built cable if you have to modify it. Looks like my cable shipped today so I assume I will need to modify it . |
Author: | RedJacket [ Fri 22. Dec 2023 17:07:51 ] |
Post subject: | Re: OMPHobby M4 ESC Telemetry |
I have a ZTW 65A ESC which is pretty much the same of OMP M4 ESC. I guess the protocol is the same but Spirit setting window shows all 0s. (not N/A). Can ZTW ESC be supported? |
Author: | StatiC [ Fri 22. Dec 2023 18:42:39 ] |
Post subject: | Re: OMPHobby M4 ESC Telemetry |
StatiC wrote: Thanks for the info. Yea... that kind of defeats the purpose of buying a pre-built cable if you have to modify it. Looks like my cable shipped today so I assume I will need to modify it . I got the cable I ordered today and it is too short for the OMPHobby M4 heli. Knowing that, I just made my own a week or so ago and got it working before this one arrived. |
Page 3 of 3 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |