Spirit System
https://www.spirit-system.com/phpBB3/

OMPHobby M4 ESC Telemetry
https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=5664		 Page 3 of 3
Author:  ZeXx86 [ Mon 04. Dec 2023 8:30:41 ]
Post subject:  Re: OMPHobby M4 ESC Telemetry
It is 22cm long.
Author:  Konrad [ Mon 04. Dec 2023 14:42:16 ]
Post subject:  Re: OMPHobby M4 ESC Telemetry
I soldered the cable myself. I used a cable for Spektrum satellites and soldered on a 4-pin servo connector. This was left over from a Unisens-E. My cable is exactly the right length at 35cm. According to Spirit, the Spirit cable is only 22 cm long and therefore much too short. I have already pointed this out to Thomas. Perhaps Spirit will change the length.
Author:  StatiC [ Tue 05. Dec 2023 19:42:55 ]
Post subject:  Re: OMPHobby M4 ESC Telemetry
Thanks for the info. Yea... that kind of defeats the purpose of buying a pre-built cable if you have to modify it. Looks like my cable shipped today so I assume I will need to modify it :(.
Author:  RedJacket [ Fri 22. Dec 2023 17:07:51 ]
Post subject:  Re: OMPHobby M4 ESC Telemetry
I have a ZTW 65A ESC which is pretty much the same of OMP M4 ESC. I guess the protocol is the same but Spirit setting window shows all 0s. (not N/A).

Can ZTW ESC be supported?
Author:  StatiC [ Fri 22. Dec 2023 18:42:39 ]
Post subject:  Re: OMPHobby M4 ESC Telemetry
StatiC wrote:
Thanks for the info. Yea... that kind of defeats the purpose of buying a pre-built cable if you have to modify it. Looks like my cable shipped today so I assume I will need to modify it :(.

I got the cable I ordered today and it is too short for the OMPHobby M4 heli. Knowing that, I just made my own a week or so ago and got it working before this one arrived.
Page 3 of 3 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/