Spirit System
https://www.spirit-system.com/phpBB3/

channels available with Spirit/Jeti (GTR)
https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=5487		 Page 1 of 1
Author:  HeliMLM [ Sat 26. Nov 2022 8:03:49 ]
Post subject:  channels available with Spirit/Jeti (GTR)
Hello Tomas,

is there a chance to get some more channels available for Spirit / Jeti? i.e. all 16 of my Tx?

now with the really great Stabi/Rescue activation via channels plus some live tuning i am running out of channels on a Heli I am using for buddyboxing too (so even more channels for stabilization and more live tuning to tame down a bit the Heli etc needed) and now another channel needed (to ch0) for switching off the 1st Buffer. what I never had thought off on a trainer becomes real: 13 channels is not enough :o
Author:  HeliMLM [ Wed 30. Nov 2022 7:27:38 ]
Post subject:  Re: channels available with Spirit/Jeti (GTR)
... to be more clear, if it was not (Sorry): of course i can use all 16 channels, but not at the same time. i am having the need of more than 13 channels mapped at the same time. :)
Author:  Habásek [ Wed 30. Nov 2022 7:30:17 ]
Post subject:  Re: channels available with Spirit/Jeti (GTR)
Hi, I was wondering where you get so many switches on your transmitter. I have them all occupied and I'm not on all the unit/geo features ... I have a DS12
Author:  HeliMLM [ Wed 30. Nov 2022 9:44:46 ]
Post subject:  Re: channels available with Spirit/Jeti (GTR)
Hi

DS-12s too :) i am using the knobs and digital trimmers a lot for all the live tuning things (esp. during initial setup) - absolutely great with the trimmers for "per Flightmode" (like Gyro) and knobs for "Global". channels 1-7 standard. Sc for Auto Rescue #12, Sb for Rescue (spring loaded) #8, Sa for banks #7, Sd for Autorotation, Sf Motor On/Off plus a channel (should be #14) to CH0 for 1St Buffer on/off, Se for trainer/student plus Stabi #9 (only for some students to normal/acro). live tuning for rotation rates and cff for taming down for students on trimmer left hor and knobs 7+8 (#10#11#13). Gyro trim per bank always on trimmer right hor.

Attachments:
Channels Mapping.png
Channels Mapping.png [ 210.65 KiB | Viewed 543 times ]
Author:  ZeXx86 [ Wed 30. Nov 2022 19:01:46 ]
Post subject:  Re: channels available with Spirit/Jeti (GTR)
We will add support for more channels for sure. I believe at least 24 channels.
However I can't tell any ETA at the moment.
Author:  HeliMLM [ Wed 30. Nov 2022 21:22:51 ]
Post subject:  Re: channels available with Spirit/Jeti (GTR)
... thx a lot for the reply. great to hear it's "on the list" even it will take some time. :D
Author:  Tanja [ Fri 02. Dec 2022 18:15:41 ]
Post subject:  Re: channels available with Spirit/Jeti (GTR)
Yes, that would be great :)!!!

Kind regards

Tanja
Author:  HeliMLM [ Thu 06. Apr 2023 6:29:31 ]
Post subject:  Re: channels available with Spirit/Jeti (GTR)
Hello Tomas

as support for 24 channels has been added with version 3.5.0: when will we be able to use those additional channels for special functions too? i tried with 3.5.0 but the total number of channels that can be assigned at the same time is still 13.... :(
Author:  ZeXx86 [ Thu 06. Apr 2023 8:21:44 ]
Post subject:  Re: channels available with Spirit/Jeti (GTR)
Hello,

when there will be time for this. At the moment we dont know. We are still working on requests that are over 2 years old.
Author:  HeliMLM [ Thu 06. Apr 2023 9:17:48 ]
Post subject:  Re: channels available with Spirit/Jeti (GTR)
thx for info - everything OK. better concentrate on the Wave project :) we are all looking forward on this one...
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/