It is currently Thu 28. Mar 2024 18:55:50

All times are UTC + 1 hour





Post new topic Reply to topic  [ 61 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 14. Nov 2022 2:57:12 
Offline

Joined: Mon 24. Oct 2022 5:39:06
Posts: 69
Alright, more updates, and now I'm completely baffled.

So after finishing the setup on the Tarot using the USB cable and Spirit software, I went into the Spirit script one more time, just for fun, and sure enough, it was working once more.

I then changed to the Goblin 380 model, and and that one doesn't work at all. I made a couple of minor changes using the PC software, plugged the S.Port cable back in, and still nothing. The integration hardware stuff is working, because I have all the telemetry working, but the Spirit script can't pull up any data, all the options remain grayed out.

One thing I should note is that every time I try to run the script, about 2-3 seconds after entering the script, I get a "Sensor lost" message. I don't know what sensor it's referring to, but that's the message, and it happens every single time I start the script.


Top
 Profile  
 
PostPosted: Mon 14. Nov 2022 14:36:29 
Offline
User avatar

Joined: Thu 02. Jul 2020 13:51:48
Posts: 50
Location: Germany / Cologne
i think the integration needs some bugfixes.
i cant get it working with Spirit 2 and Archer RS with ethos.
under opentx with same helicopter everything is working well.


Top
 Profile  
 
PostPosted: Mon 14. Nov 2022 17:04:36 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
EthOS might need F.Port with some receivers.
Brain integration is working only with F.Port.
We are at vacations now, so we cant check anything.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 14. Nov 2022 17:18:01 
Offline
User avatar

Joined: Thu 02. Jul 2020 13:51:48
Posts: 50
Location: Germany / Cologne
will the spirit 2 support fport in the future?


Last edited by Loetefix on Mon 14. Nov 2022 19:12:24, edited 2 times in total.

Top
 Profile  
 
PostPosted: Mon 14. Nov 2022 17:34:22 
Offline

Joined: Mon 28. Mar 2022 16:07:07
Posts: 10
Working great for me. I just tried version 2. It has a couple quirk with the changes from version 1.

1. The save dialog box doesn't close after saving and you have to back out of it.

2. The close dialog box doesn't close when you click the button although the script does and the FBL light is steady.

I'm running Spirit GT firmware 3.4.3, Ethos 1.4.2, Archer RS F.port on v2.1.9, Frsky X18S

Works great and I'm amazed at how fast it is. I had integration setup on my Taranis 2019 with Spirit 2 and honestly found it slightly awkward. This is great! Thanks!


Top
 Profile  
 
PostPosted: Mon 14. Nov 2022 17:54:03 
Offline

Joined: Sun 28. Mar 2021 10:43:14
Posts: 17
But with F-Port it is not possible to use external sensors like the Unisense, so we need support for F-Bus.


Top
 Profile  
 
PostPosted: Mon 02. Jan 2023 17:08:28 
Offline
User avatar

Joined: Thu 02. Jul 2020 13:51:48
Posts: 50
Location: Germany / Cologne
Hi,
Any news here?


Top
 Profile  
 
PostPosted: Mon 02. Jan 2023 19:31:52 
Offline

Joined: Sun 27. Sep 2020 19:31:06
Posts: 10
Loetefix wrote:
Hi,
Any news here?


Most of that's happening over here: viewtopic.php?f=20&t=5501&p=39370&hilit=ethos#p39370

Summary: spirit firmware with fport support expected soon for most spirit units and not just the gt. frsky isn't interested in supporting sbus+s.port to the degree required on ethos, so looks like converting over to fport, if we haven't already, is the way it's going to go.

I'm hoping the existing s.port inversion cable works for f.port on the spirit II personally - other than that I'm good to go.


Top
 Profile  
 
PostPosted: Tue 03. Jan 2023 13:48:27 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
Yes, Spirit 2, Spirit Pro, microSpirit should all work with our FrSky integration cable and F.Port.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 06. Mar 2023 17:02:35 
Offline

Joined: Mon 06. Mar 2023 16:31:32
Posts: 1
Hello,
will the sprit 1 also working with the F port integration cable?
Thank's


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 61 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .