It is currently Thu 28. Mar 2024 18:06:21

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 07. Feb 2022 7:27:23 
Offline

Joined: Mon 14. Sep 2020 14:49:54
Posts: 34
Location: Glonn, Bavaria, Germany
Hi,
in the ESC telemetry all values are correct shown in FR-Sky ETHOS exept "RBOX C2". This value shows "mAh or Ah" instead of the "BEC Voltage [V]" - provided by ESC Telemetry from Spirit.
Here described: http://manual.spirit-system.com/index.p ... _telemetry
FR-Sky told me that ETHOS is automatically selecting the correct values regarding the sensor data. There is no correction possible by myself like in OpenTX. I would ask you to change this to show automatically the right value and dimension like described in the manual and done in the other telemetry values that are correct.
BR Bernhard


Top
 Profile  
 
PostPosted: Wed 09. Feb 2022 8:28:25 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
It is not technically possible to change the variable type. It is pre-programmed in the Ethos, similarly as OpenTX. It is displayed correctly by Ethos. But used intentionally by Spirit to save bandwidth of the SPort and not to send more than needed variables.
The only solution is to send different telemetry variable. With future updates this shouldnt be a problem, especially when new FPort is much faster.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 09. Feb 2022 10:19:46 
Offline

Joined: Mon 14. Sep 2020 14:49:54
Posts: 34
Location: Glonn, Bavaria, Germany
Do you plan to implement the F-Port Protocol for the Spirit2 as well in the future? Because my receivers can be changed.


Top
 Profile  
 
PostPosted: Wed 09. Mar 2022 10:47:45 
Offline

Joined: Mon 14. Sep 2020 14:49:54
Posts: 34
Location: Glonn, Bavaria, Germany
Hi, there is a new answer from the developers from Ethos in GitHub.
It would be great if you can have a look. It is a similar case where the DIY sensor can not distinguish between the values comming form Spirit2.

https://github.com/FrSkyRC/ETHOS-Feedba ... ssues/1472

You are using the "reserved" Sensor ID from Redundancy boxes
There are no problems mentioned from users regarding compatibility issues
so it seems your sensor does not "emulate" the red.box sensor data in a correct way.

In other words: it's not a problem of ethos.

I would recommend you use "public" and not reserved Sensor ID's
You don't give hints about your sensor, most are based on Arduino HW

would advice to read some of the following links

https://github-wiki-see.page/m/yaapu/Fr ... ocol-specs
https://www.frsky-rc.com/wp-content/upl ... OTOCOL.PDF
https://www.rcgroups.com/forums/showthr ... nfigurable


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .