Spirit System
https://www.spirit-system.com/phpBB3/

Governor Activation Issues
https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=5052
Page 1 of 1

Author:  krm97 [ Mon 10. Jan 2022 1:12:04 ]
Post subject:  Governor Activation Issues

I had a Castle Edge 160 ESC on my Goblin Raw in which the governor worked flawlessly. I did not use the Spirit GT governor.

I recently switched to a Hobbywing 130A HV ESC and tried using the Spirit Governor. The Spirit Governor will not activate because it wants a throttle reading above 50%. This is very unfortunate because at 42% throttle reading my RPM's are 2000rpm. Why would you ever set the governor activation at 50%?????????????????? It has nothing to do with the RPM readings on the heli. It might be somewhat predictive of RPM's but not a very accurate indicator.

Can you fix this issue?????

All the best,

Ken

Author:  HeliMLM [ Mon 10. Jan 2022 8:20:14 ]
Post subject:  Re: Governor Activation Issues

Hi

if you configure the Spirit Gov, you will i.e. set your max. Headspeed value to i.e. 2.500rpms.... then 50% will be only 1.250rpms (it is always the percentage of the Max.Headspeed parameter then). what headspeeds do you like to configure?

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/