It is currently Fri 29. Mar 2024 9:41:18

All times are UTC + 1 hour





Post new topic Reply to topic  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sun 01. Aug 2021 12:00:45 
Offline

Joined: Thu 05. Oct 2017 18:07:11
Posts: 9
Hi Tomas

Maybe it is already wellknown by you :P ….

Today I noticed that the 6 degree value is not adjustable with Jeti integration 3.2.2

All other parameters are adjustable so far.

With Win PC application all works fine including 6 degree adjustment.

Same behavior on all Helis (equiped with Spirit red, Pro, II and RS)

Best regards
Walter


Top
 Profile  
 
PostPosted: Thu 05. Aug 2021 21:53:45 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hi,

it is adjustable. Nothing changed for a few years there.
Can you explain what do you think is wrong?

Please make sure to use correct integration file with correction firmware version.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sat 07. Aug 2021 7:04:35 
Offline

Joined: Thu 05. Oct 2017 18:07:11
Posts: 9
I have in Jeti transmitter the 3.2.2 Integrationfile and in the FBLs the 3.2.2 Firmware.

It is no problem to editing the 6degree value in the transmitter, but there is no mechanical movement on all Swashplate servos.

Normally if you edit the value the servos jumps to the corresponding position and following the parameter change.

But in my case: nothing happens.

With PC software it works perfect.


Top
 Profile  
 
PostPosted: Tue 10. Aug 2021 10:13:32 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
You have to click at the >> Geometry 6° (tuning) ;)

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 23. Aug 2021 8:48:58 
Offline

Joined: Tue 21. Aug 2018 8:27:19
Posts: 1
Have seen this problem several times - so it is real. Sometimes it works sometimes it does not. The work around for me has been to enter the setup via the setup wizard.


Top
 Profile  
 
PostPosted: Mon 30. Aug 2021 13:33:43 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
It is always required to click at the Geometry 6° label. Only then the unit will switch to the special mode where swashplate is tilted and you can see the actual value.
Otherwise it is only changing configuration with no visual checkup.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .