It is currently Thu 28. Mar 2024 10:33:32

All times are UTC + 1 hour





Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 12. Apr 2021 3:14:44 
Offline

Joined: Sun 11. Oct 2020 21:48:21
Posts: 35
I am experiencing this problem with all my spirit units 3.2.2 and 3.2.1
1-take off (no stabi function)
2-activate stabi function (ACRO, rate =3)
3- stabilization works ok, self level ok
4-do several piro-flips (4-5)
5- after releasing sticks, the helicopter will to self level, but it will become erratic, mostly will try to move backwards (or forward)
6-it will not come back to level, always will try to move (back or forward)
7- if I turn off stabilization, problem goes away, I can fly normal with no problems

This seems be consistent with my Protos 380, XL550, TREX 500, TREX 650x.
I tried stabi correction ON/OFF but no difference

please help!


Top
 Profile  
 
PostPosted: Mon 12. Apr 2021 4:38:19 
Offline

Joined: Fri 06. Dec 2019 8:22:54
Posts: 131
gjhernandez wrote:
I am experiencing this problem with all my spirit units 3.2.2 and 3.2.1
1-take off (no stabi function)
2-activate stabi function (ACRO, rate =3)
3- stabilization works ok, self level ok
4-do several piro-flips (4-5)
5- after releasing sticks, the helicopter will to self level, but it will become erratic, mostly will try to move backwards (or forward)
6-it will not come back to level, always will try to move (back or forward)
7- if I turn off stabilization, problem goes away, I can fly normal with no problems

This seems be consistent with my Protos 380, XL550, TREX 500, TREX 650x.
I tried stabi correction ON/OFF but no difference

please help!


Hello
Switch off stabi correction, and switch extended signal processing on. That solved the problem
for me.
Latjo


Top
 Profile  
 
PostPosted: Mon 12. Apr 2021 13:08:39 
Offline

Joined: Sun 11. Oct 2020 21:48:21
Posts: 35
thanks, I will try todayl


Top
 Profile  
 
PostPosted: Mon 12. Apr 2021 13:30:13 
Offline

Joined: Sun 11. Oct 2020 21:48:21
Posts: 35
Just a note for the spirit team: This behavior seems to be consistent, with all my spirit units (8+) and all sized helis.
This happens just after doing some 3D "crazy" maneuvers , the heli will start moving mostly backwards like if it has some TRIM.
Spirit team, please comment


Top
 Profile  
 
PostPosted: Mon 12. Apr 2021 21:30:42 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

please note when Stabi Correction is ON, Extended signal processing should be OFF (and vice versa).
This is very important. There is also possibility to improve overall precision noticeably by doing gyro calibration.
So if it will not help, I can let you know how to make the calibration. This will have positive impact with any configuration.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 12. Apr 2021 22:11:09 
Offline

Joined: Sun 11. Oct 2020 21:48:21
Posts: 35
Please let me know how to perform the gyro calibration. Even in coaxial mode one of my smaller helis seems to dfrit (Blade 330)


Top
 Profile  
 
PostPosted: Tue 13. Apr 2021 0:27:27 
Offline

Joined: Sun 11. Oct 2020 21:48:21
Posts: 35
ZeXx86 wrote:
Hello,

please note when Stabi Correction is ON, Extended signal processing should be OFF (and vice versa).
This is very important. There is also possibility to improve overall precision noticeably by doing gyro calibration.
So if it will not help, I can let you know how to make the calibration. This will have positive impact with any configuration.

I tried with the above combinations, did not help. Also I moved control rate to 1 and the model becomes impossible to fly.


Top
 Profile  
 
PostPosted: Tue 13. Apr 2021 16:56:02 
Offline

Joined: Sun 11. Oct 2020 21:48:21
Posts: 35
ZeXx86 wrote:
Hello,

please note when Stabi Correction is ON, Extended signal processing should be OFF (and vice versa).
This is very important. There is also possibility to improve overall precision noticeably by doing gyro calibration.
So if it will not help, I can let you know how to make the calibration. This will have positive impact with any configuration.


Can you please send me the gyro calibration instructions? I also have a geolink module and I want to enjoy the full Spirit features as intended, not struggling with fighting against the stabilizer.


Top
 Profile  
 
PostPosted: Thu 15. Apr 2021 13:30:24 
Offline

Joined: Sun 11. Oct 2020 21:48:21
Posts: 35
I have not yet received the gyro calibration instructions. I have sent emails also.
I have bought about 8+ Spirit units in the past year and I have recommended spirit to my friends in Mexico.
I can´t believe why the Spirit guys are not taking me seriously
is it really that hard to just send me the instructions?


Top
 Profile  
 
PostPosted: Thu 15. Apr 2021 16:05:02 
Offline

Joined: Mon 29. Jan 2018 10:52:34
Posts: 89
I understand your frustration, but there are some things to consider to alleviate it a bit.

They are currently working on releasing a new product.
They don't seem to have enough resources for forum and product support -> lower FBL price than most.

I am not defending them, just trying to reduce your frustration. In my opinion, they would sell a lot more if they allocate some resources to forum support.

In the end, I am curious on the outcome.

Cheers


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .