Spirit System
https://www.spirit-system.com/phpBB3/

Chanel mapping in Spirit
https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=1994		 Page 1 of 1
Author:  Windsurfer1976 [ Sat 27. May 2017 23:04:46 ]
Post subject:  Chanel mapping in Spirit
Hi Thomas,

im using a hott system with Gr-16 receiver and a mz-24 Sender.

As i use the sumd connection all channels are used by the system (Gyro, bank Switch included). I would like to use more than 8 channels on my gr-16 as i use the sumd connection (i need few more for led controller). But there is a issue with the channel mapping. The channels 8-12 can only be used by special functions.

It would be great if it will be possible to map the bank switching or gyro sens on chanels 8-12. Then i could use the free ports on my gr-16 via mapping to control my led controller.

Hope u understand my problem ;-)

Greetings Andreas
Author:  ZeXx86 [ Sun 28. May 2017 10:50:28 ]
Post subject:  Re: Chanel mapping in Spirit
Hi,

you may try to remap the channels in your receiver.
This should be possible with GR-16 if I am not wrong.

Thank you for your suggestion!
Author:  Windsurfer1976 [ Mon 29. May 2017 22:12:25 ]
Post subject:  Re: Chanel mapping in Spirit
Hi Thomas,

thank you for your reply but this is not possible. If I map chanel 9 to port 1 then it goes through sumd on chanel 1.

If I could select gyro gain or bank switch to chanel 9 - 12 it would work....

Greetings Andreas

Gesendet von meinem SM-G800F mit Tapatalk
Author:  ZeXx86 [ Tue 30. May 2017 8:22:48 ]
Post subject:  Re: Chanel mapping in Spirit
Thank you for the details.

I believe it will be possible to implement it in the future updates.
Author:  Windsurfer1976 [ Tue 30. May 2017 21:30:20 ]
Post subject:  Re: Chanel mapping in Spirit
Thank you Thomas

Gesendet von meinem SM-G800F mit Tapatalk
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/