Screenshot aus JLC:
Gesendet von iPhone mit Tapatalk
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| ESC Telemetry https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=1788 |
Page 8 of 10 |
| Author: | flydus [ Mon 17. Apr 2017 19:09:41 ] |
| Post subject: | Re: ESC Telemetry |
Great news that the telemetry link becomes available soon. Hopefully the whole spectrum of values like with the jLog becomes available in the future. Thank you Thomas Gesendet von iPhone mit Tapatalk |
|
| Author: | ZeXx86 [ Tue 18. Apr 2017 7:24:16 ] |
| Post subject: | Re: ESC Telemetry |
No problem. What other values you can see with JLog? |
|
| Author: | gerry [ Tue 18. Apr 2017 8:04:17 ] |
| Post subject: | Re: ESC Telemetry |
Hello Tomas! The following values are output from J LOg2.6 and Cosmic / Jive Pro: 1.RPM 2.mAh (capacity) 3.Battery Volt 4.Motor Ampere 5.RX voltage 6.Bec Volt 7.Bec Amp (only for Cosmic) 8.Temperature Fet 9.Temperature Bec If that were possible, the J LOg come out with us all and are replaced by the cable. The cables should have a total length of 40 cm. 1.The part from the 5-pin white plug to the Y distributor 30 cm (5-pin connector) 2. The part from the Y distributor to the Spirit (3 poles and 1 pole) about 10 cm, these JR plugs we would also ourselves to the correct length Krimpen.Einfach only the empty plug. Greetings, Gernot Please ask if this is possible? |
|
| Author: | ZeXx86 [ Tue 18. Apr 2017 8:10:27 ] |
| Post subject: | Re: ESC Telemetry |
For sure all the values can be displayed also by Spirit. I guess that RX voltage = Bec Volt. Regerding connectors, you can change it as you want. You can already buy the cable in our eshop. |
|
| Author: | flydus [ Tue 18. Apr 2017 8:15:12 ] |
| Post subject: | Re: ESC Telemetry |
Screenshot aus JLC: Gesendet von iPhone mit Tapatalk |
|
| Author: | gerry [ Tue 18. Apr 2017 8:15:53 ] |
| Post subject: | Re: ESC Telemetry |
Good news! Sorry the RX voltage comes from the Jeti receiver, has nothing to do with Kontronik. Bec Volt ond Bec Ampere come from Kontronik, whereby only the cosmos the Bec Ampere issues, why this is so we do not know? With the cables it would be good if you can make them longer, the extensions are always error-prone? Greetings, Gernot |
|
| Author: | gerry [ Tue 18. Apr 2017 8:18:06 ] |
| Post subject: | Re: ESC Telemetry |
Sorry PWM I had forgotten !! |
|
| Author: | gerry [ Tue 18. Apr 2017 8:22:17 ] |
| Post subject: | Re: ESC Telemetry |
The respective maximum and minimum values are stored, recorded and displayed by Jeti itself! As it is with other stations I do not know! |
|
| Author: | gabs_mex [ Mon 24. Apr 2017 15:43:02 ] |
| Post subject: | Re: ESC Telemetry |
Hello, is the Tribunus compatible yet or will have to wait for the new update and what is the ETA?? What connection will the Tribunus have to use to be compatible with spirit pro |
|
| Author: | ZeXx86 [ Mon 24. Apr 2017 17:08:39 ] |
| Post subject: | Re: ESC Telemetry |
Hello, http://manual.spirit-system.com/index.p ... _telemetry It will be available in few days, probably this week. Cable is in our eshop available for more than week. |
|
| Page 8 of 10 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|