Spirit System https://www.spirit-system.com/phpBB3/ |
|
GPS? https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=1893 |
Page 25 of 30 |
Author: | ZeXx86 [ Sun 05. Aug 2018 21:25:57 ] |
Post subject: | Re: GPS? |
Thank you. That is not your position, but detected position of your internet service provider. Your position will be visible once you will get a valid GNSS signal. |
Author: | Genesis [ Mon 06. Aug 2018 1:07:34 ] |
Post subject: | Re: GPS? |
Hi Tomas, I too would like to extend my congratulations on yet another superior product developed and produced by Spirit Systems, hats off to you and your team !!! I purchased one yesterday and decided to order another this morning before they get sold out. Regards, Kevin |
Author: | RedJacket [ Mon 06. Aug 2018 11:22:53 ] |
Post subject: | Re: GPS? |
Hello fellow pilots, I made a simple demonstration video for you. I am sure others will follow soon. |
Author: | alchemy66 [ Mon 06. Aug 2018 11:38:03 ] |
Post subject: | Re: GPS? |
RedJacket wrote: Hello fellow pilots, I made a simple demonstration video for you. I am sure others will follow soon. Very nice demo! |
Author: | RedJacket [ Mon 06. Aug 2018 22:56:58 ] |
Post subject: | Re: GPS? |
alchemy66 wrote: RedJacket wrote: Hello fellow pilots, I made a simple demonstration video for you. I am sure others will follow soon. Very nice demo! |
Author: | ZeXx86 [ Tue 07. Aug 2018 7:58:13 ] |
Post subject: | Re: GPS? |
Thank you very much! Very nice! |
Author: | Yogi43 [ Tue 07. Aug 2018 17:57:41 ] |
Post subject: | Re: GPS? |
Today I also installed the new Software and the new firmware on Spirit and Geolink. I used a switch with assigned Return to Home function. When programing the RTH-position by switch it seems to be fine if I look at the moves of the swashplate. But if I have a look the map, the shown position is completely wrong |
Author: | Rufus [ Tue 07. Aug 2018 18:59:08 ] |
Post subject: | Re: GPS? |
Yogi43 wrote: Today I also installed the new Software and the new firmware on Spirit and Geolink. I used a switch with assigned Return to Home function. When programing the RTH-position by switch it seems to be fine if I look at the moves of the swashplate. But if I have a look the map, the shown position is completely wrong Can you please elaborate 'wrong' ? It didn't land where the home position was setup or close to it ? I haven't had time to setup mine yet,just reading feedbacks and stuff. Thanks. Sent from my SM-N950W using Tapatalk |
Author: | Yogi43 [ Tue 07. Aug 2018 19:12:28 ] |
Post subject: | Re: GPS? |
Wrong means in this case about 20 km away - so, positions marked on the map shouldn't be used actually. |
Author: | ZeXx86 [ Tue 07. Aug 2018 19:34:51 ] |
Post subject: | Re: GPS? |
Are you really looking at Home position? Very likely it could be ISP position which is detected from your internet provider. This could fit what you can see. |
Page 25 of 30 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |