It is currently Thu 10. Oct 2024 15:52:40

All times are UTC + 1 hour





Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2, 3  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 09. Aug 2023 21:18:41 
Offline

Joined: Wed 09. Aug 2023 20:42:16
Posts: 5
Hi everyone,

Question regarding Jeti integration

I have Jeti DS-14II with Spirit RS installed and working properly in my Heli after using setup wizard. However, even though I have up to date firmware in Transmitter V5.07 and Spirit unit V3.5, I'm showing an error message displayed on the Transmitter Spirit menu in this form: "Spirit.bin file update required"! I have checked my TX system information which appears ok and contacted Esprit Model and was advised to contact Spirit personnel. Anyone, have this issue or know how to correct this? As, I stated the helicopter is functioning well and ready for first flight.


Top
 Profile  
 
PostPosted: Thu 10. Aug 2023 8:57:16 
Online
User avatar

Joined: Sun 09. Jun 2013 13:14:17
Posts: 992
Location: Plzeň
Hi, you need to update the bin file from the Spirit website.
Jeti does not have current bin files in its Jetistudio when updating the transmitter.
Download them to your PC, unzip them and copy them to the SD card in the Devices directory

https://spirit-system.com/dl/jeti/SPIRIT-3-5-r2.zip

_________________
Spirit System (Spirit W1, RS & GTR & all the others)
Spirit Wave & JETI DS 12
http://www.habada.cz


Top
 Profile  
 
PostPosted: Thu 10. Aug 2023 13:01:44 
Offline

Joined: Wed 09. Aug 2023 20:42:16
Posts: 5
I have already performed the update to my transmitter with the newest Spirit bin file V 3.5 successfully to to the devices folder. My firmware is showing V3.5 However, the message still remains.


Top
 Profile  
 
PostPosted: Fri 11. Aug 2023 10:25:22 
Online
User avatar

Joined: Sun 09. Jun 2013 13:14:17
Posts: 992
Location: Plzeň
Did you do this?
Download them to your PC, unzip them and copy them to the SD card in the Devices directory

https://spirit-system.com/dl/jeti/SPIRIT-3-5-r2.zip

Update via Jetibox installs an older version of the bin file.

_________________
Spirit System (Spirit W1, RS & GTR & all the others)
Spirit Wave & JETI DS 12
http://www.habada.cz


Top
 Profile  
 
PostPosted: Fri 11. Aug 2023 10:26:33 
Online
User avatar

Joined: Sun 09. Jun 2013 13:14:17
Posts: 992
Location: Plzeň
https://www.youtube.com/watch?v=Ckll96KBftk

_________________
Spirit System (Spirit W1, RS & GTR & all the others)
Spirit Wave & JETI DS 12
http://www.habada.cz


Top
 Profile  
 
PostPosted: Fri 11. Aug 2023 10:28:43 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12398
Birdseye1983 wrote:
I have already performed the update to my transmitter with the newest Spirit bin file V 3.5 successfully to to the devices folder. My firmware is showing V3.5 However, the message still remains.

Unfortunately it means that your old file was not actually updated. If it will be updated correctly (BIN files replaced for new), then it will work with 100% certainty.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 11. Aug 2023 13:04:44 
Offline

Joined: Wed 09. Aug 2023 20:42:16
Posts: 5
Ok, I will remove previous download as it may have been corrupted and perform the Spirit bin file upload again. Perhaps, this is why I'm reading an error to the Spirit bin update. Thanks!


Top
 Profile  
 
PostPosted: Fri 11. Aug 2023 17:41:31 
Offline

Joined: Wed 09. Aug 2023 20:42:16
Posts: 5
Success! My previous attempt had the files just sitting in devices and once I moved all three to its destination file the error message disappeared. The video provided by Habasek really helped a lot thank you!!


Top
 Profile  
 
PostPosted: Tue 05. Sep 2023 13:30:50 
Offline

Joined: Sat 21. Nov 2015 14:07:14
Posts: 69
Hi there,

I picked up this thread to find help but it's still showing an error message.

I deleted the old file from my devices folder in my Jeti DC-14 and copied the attached file as replacement. As the error persists, is this the correct file? If not how are we supposed to find the correct file rather than guessing from an existing thread?

Thanks in anticipation.


Attachments:
SPIRIT-3-5-r2.zip [452.87 KiB]
Downloaded 126 times

_________________
Regards,
Heliman550
Top
 Profile  
 
PostPosted: Wed 06. Sep 2023 7:43:20 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12398
Hello,

yes, these are correct files.
Unfortunately the often problem is the files are placed in a wrong directory or are named incorrectly.
Can you take a screenshot of your SD Card - Devices directory?

When you will delete SPIRIT.BIN file the integration must stop working completely. Then you can load the new one.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2, 3  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .