It is currently Mon 09. Dec 2024 15:17:49

All times are UTC + 1 hour





Post new topic Reply to topic  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 06. Feb 2023 22:19:37 
Offline

Joined: Wed 09. Jun 2021 11:47:04
Posts: 13
Hi All. I've been practising my 450l in stability normal but decided to change to scale. When I changed via the Bluetooth and a mobile the tail would not hold even when I pushed the gyro up to -90%. In normal I had it fine at -60% but I'm not sure what is happening in scale stability and why it won't hold solid. Can anyone assist maybe. Am I going up the wrong way should it be lower than -60.
Ta


Top
 Profile  
 
PostPosted: Tue 07. Feb 2023 3:44:16 
Offline

Joined: Tue 24. Jan 2023 19:48:59
Posts: 7
limabean1 wrote:
Hi All. I've been practising my 450l in stability normal but decided to change to scale. When I changed via the Bluetooth and a mobile the tail would not hold even when I pushed the gyro up to -90%. In normal I had it fine at -60% but I'm not sure what is happening in scale stability and why it won't hold solid. Can anyone assist maybe. Am I going up the wrong way should it be lower than -60.
Ta



From my understanding, Stabi Scale is Rate mode Only, not heading hold
In Normal Stabilization, heading hold is or tries to maintain on all control surfaces.

Maybe this helps


Top
 Profile  
 
PostPosted: Tue 07. Feb 2023 4:37:51 
Offline

Joined: Wed 09. Jun 2021 11:47:04
Posts: 13
So are you saying that I put my gyro back in to normal positive instead of negative as i had it for for stabi normal.


Top
 Profile  
 
PostPosted: Sun 11. Jun 2023 7:44:43 
Offline

Joined: Mon 03. Apr 2023 14:46:19
Posts: 65
limabean1 wrote:
Hi All. I've been practising my 450l in stability normal but decided to change to scale. When I changed via the Bluetooth and a mobile the tail would not hold even when I pushed the gyro up to -90%. In normal I had it fine at -60% but I'm not sure what is happening in scale stability and why it won't hold solid. Can anyone assist maybe. Am I going up the wrong way should it be lower than -60.
Ta



for scale you should have i at around + 55-70% headhold. NOT negative side of the gyro

next i wonder is how did you set up you scale switch? did you go to CHANNELS and assignet a swith to STABI SCALE ?
then you go to the STABI Menu and put it in SELECT BY CHANNEL

if your heli was flying good before you put it scale then this should not make any difference for tail.. only cyclic/stability

unless you changed someting


Top
 Profile  
 
PostPosted: Tue 13. Feb 2024 16:13:57 
Offline
User avatar

Joined: Sun 11. Feb 2024 20:57:33
Posts: 3
Location: Spain
Is it possible to enhance tail authority in stability scale helicopters by implementing unconventional design modifications or utilizing alternative control mechanisms?

_________________
umek.pro insulator supplier


Top
 Profile  
 
PostPosted: Sat 02. Mar 2024 2:27:11 
Offline

Joined: Wed 09. Jun 2021 11:47:04
Posts: 13
Still having issues with the gyro. The heli is in scale stability mode and the gyro has been run from 40 to 75 and it doesn't seem to make any difference to the waging that is present. Any thing I might be missing anyone.?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .