Spirit System
https://www.spirit-system.com/phpBB3/

GeoLink on a GOBLIN 500 Tailboom
https://www.spirit-system.com/phpBB3/viewtopic.php?f=21&t=4703
Page 1 of 1

Author:  Dr.Fleming [ Fri 11. Jun 2021 17:22:59 ]
Post subject:  GeoLink on a GOBLIN 500 Tailboom

Has some experience mounting the GeoLink on a Tailboom from a Goblin 500, I know that Spirit sells a support, but I think it is to high and Ugley, I have looked at the GeoLink manual, and it says that through the software it can be digitally leveled, then because the support ! ?? By the way, I will try to mount it close to the FBL Unit unther the Canopy, but may they will not receive a good SAT Signal !?

Author:  BenLeo [ Sun 13. Jun 2021 1:19:38 ]
Post subject:  Re: GeoLink on a GOBLIN 500 Tailboom

Try this:

https://www.thingiverse.com/thing:3558583

Author:  Dr.Fleming [ Fri 18. Jun 2021 11:35:12 ]
Post subject:  Re: GeoLink on a GOBLIN 500 Tailboom

BenLeo wrote:


Hi, also I saw this, that's mean it is possible direct on the boom !?

Attachments:
File comment: GeoLink on Direct on Goblin 700 Tail Boom!
Goblin Kraken 700 GeoLink direct on the boom.jpg
Goblin Kraken 700 GeoLink direct on the boom.jpg [ 88.89 KiB | Viewed 1196 times ]

Author:  gjhernandez [ Fri 18. Jun 2021 15:26:28 ]
Post subject:  Re: GeoLink on a GOBLIN 500 Tailboom

Yes, that will work just fine

Author:  Ramber [ Sun 04. Jul 2021 21:24:54 ]
Post subject:  Re: GeoLink on a GOBLIN 500 Tailboom

Blade can strike a boom really hard, so Geolink flyes away with a bullet speed. 3M double tape woun't help at all! You'll never found it, even in a low grass.

So, I made my own mount, and I made it really safe:
https://www.thingiverse.com/thing:3953629 - this is for Goblin 380. If you like it - tell me and I'll send you Goblin 500 version.

The last time I had a boomstrike, 3 of 2 nylon ties was broken, but the Geolink was safe!

Author:  Luv2fly2 [ Tue 24. Aug 2021 14:09:23 ]
Post subject:  Re: GeoLink on a GOBLIN 500 Tailboom

Dr.Fleming wrote:
Has some experience mounting the GeoLink on a Tailboom from a Goblin 500, I know that Spirit sells a support, but I think it is to high and Ugley, I have looked at the GeoLink manual, and it says that through the software it can be digitally leveled, then because the support ! ?? By the way, I will try to mount it close to the FBL Unit unther the Canopy, but may they will not receive a good SAT Signal !?



On my 570 it is directly mounted on the boom and I didn't do a digital level and works GREAT.
I also used the double sided tape and made the mount like the manual shows.

Author:  Ramber [ Thu 04. Nov 2021 9:04:57 ]
Post subject:  Re: GeoLink on a GOBLIN 500 Tailboom

Last weekend I had a boomstrike on my Trex700. I think that canopy flew into the main rotor.
It was great! A real blast in the air!

My Geolink mount worked fine.

Attachments:
IMG20211104104733.jpg
IMG20211104104733.jpg [ 1.24 MiB | Viewed 1028 times ]
IMG20211104104722.jpg
IMG20211104104722.jpg [ 241.12 KiB | Viewed 1028 times ]
IMG20211104104713.jpg
IMG20211104104713.jpg [ 469.34 KiB | Viewed 1028 times ]

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/