Spirit System
https://www.spirit-system.com/phpBB3/

Telemetry - capacity Alarms - Hott MC20 - Align RCE-BLE130A
https://www.spirit-system.com/phpBB3/viewtopic.php?f=21&t=4524		 Page 1 of 1
Author:  tgerdm [ Wed 03. Feb 2021 22:25:20 ]
Post subject:  Telemetry - capacity Alarms - Hott MC20 - Align RCE-BLE130A
Hello,

i have the Spirit II with hot integration cable and Telemetry cable to an Align RCE-BLE130A Speed Controller.
Telemetry Data is displayed on the MC20 Hott Transmitter, integration Menue for the Spirit is working also fine.

The consumed capacity is counting up, ok.
Question is, if it is possible to set up a Capacity like lets say 3000mAh and then generate a Telemetry Alarm at the Hott MC-20.

Is there a setting for capacity telemetry Alarms ?

regards,
Timo
Author:  10x [ Wed 03. Feb 2021 22:54:12 ]
Post subject:  Re: Telemetry - capacity Alarms - Hott MC20 - Align RCE-BLE1
tgerdm wrote:
Hello,

i have the Spirit II with hot integration cable and Telemetry cable to an Align RCE-BLE130A Speed Controller.
Telemetry Data is displayed on the MC20 Hott Transmitter, integration Menue for the Spirit is working also fine.

The consumed capacity is counting up, ok.
Question is, if it is possible to set up a Capacity like lets say 3000mAh and then generate a Telemetry Alarm at the Hott MC-20.

Is there a setting for capacity telemetry Alarms ?

regards,
Timo


I would of thought that the alarm would be set up in the transmitter, it is in Spektrum and Jeti.....
Author:  tgerdm [ Thu 04. Feb 2021 17:04:16 ]
Post subject:  Re: Telemetry - capacity Alarms - Hott MC20 - Align RCE-BLE1
Hello 10x,

the MC-20 is outdated and does not support this,
I think i have to use a JLog S32 to get the Alarms.


thanks,
Timo
Author:  ZeXx86 [ Fri 05. Feb 2021 10:07:53 ]
Post subject:  Re: Telemetry - capacity Alarms - Hott MC20 - Align RCE-BLE1
Hello,

in future update we plan to add Capacity alarm like this.
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/