Spirit System
https://www.spirit-system.com/phpBB3/

How to power the red fbl system
https://www.spirit-system.com/phpBB3/viewtopic.php?f=21&t=1017
Page 1 of 1

Author:  ZeXx86 [ Wed 04. Nov 2015 21:24:16 ]
Post subject:  Re: How to power the red fbl system

Hello,

you can connect secondary satellite to the RUD port only.
Throttle must be connected to the AUX.

If you will use Y-harness, you can connect battery to the RUD (second free Y-harness cable).

In this way, it will work without any problem.
If you will need second power input, you can also use second Y-harness in the AUX.

If you are using classic receiver connection, then there are two power leads so you are feeding the unit from receiver.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/