It is currently Mon 09. Dec 2024 14:36:24

All times are UTC + 1 hour





Post new topic Reply to topic  [ 92 posts ]  Go to page 1, 2, 3, 4, 5 ... 10  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 22. May 2024 19:16:12 
Offline

Joined: Wed 10. May 2023 9:36:53
Posts: 38
Location: The Netherlands
Has anyone who is on FrSky Ethos, updated to version 1.5.8? I cannot seem to get the Spirit integration responding, meaning it does open but all parameter values are greyed out. Only the save and close options are clickable. The Spirit GT does however recognise that the integration is opened and starts flashing the LED. Tried copying fresh files into the TX as well.

setup:
Tx. FrSky x20s (ver1.5.8)
Rx. r10+ archer plus on fbus / access
Spirit GT (ver 3.6.1)

The only change did here is the Ethos update, so could be that they introduced some incompatibility in the later versions of Ethos?


Last edited by senaka on Thu 23. May 2024 7:19:06, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed 22. May 2024 21:14:28 
Offline

Joined: Wed 15. May 2024 21:21:38
Posts: 10
Which was the last version with functional integration on ethos on your system?


Top
 Profile  
 
PostPosted: Thu 23. May 2024 7:18:14 
Offline

Joined: Wed 10. May 2023 9:36:53
Posts: 38
Location: The Netherlands
It was Ethos 1.4.7


Top
 Profile  
 
PostPosted: Thu 23. May 2024 7:58:13 
Offline

Joined: Wed 15. May 2024 21:21:38
Posts: 10
Thanks for the information, that declares why my integration won't work on ethos. i'd started on 1.5.6 and now im on 1.5.8 and integration never worked for me.

so i think the lua script is too old and not compatible, it's written in june 2023 so i expect it won't run on newer ethos versions at all


Top
 Profile  
 
PostPosted: Thu 23. May 2024 16:32:19 
Offline

Joined: Wed 21. Dec 2016 15:13:38
Posts: 574
Location: Germany
Hello,
I have an Horus X10S Express and I must just say after update to ETHOS 1.5.8 the telemetry works fine but the integration doesn't work -
100 % shure all was working fine with ETHOS 1.4.17 !

I'm not entirely sure anymore, but I think with ETHOS 1.5.7 it works also all fine too - I'll try to double check it -

The telemetrie works fine only with Spirit FW 3.6.1 - Spirit FW 3.6.2 doesn't work nothing neither telemetry and sticks or switches nor telemetry - Tomas said that we will get FW 3.7.0, but I don't know when we get it, some days are gone -

Regards


Top
 Profile  
 
PostPosted: Fri 24. May 2024 6:54:12 
Offline

Joined: Wed 10. May 2023 9:36:53
Posts: 38
Location: The Netherlands
Thanks for the info guys.


Top
 Profile  
 
PostPosted: Fri 24. May 2024 22:08:21 
Offline

Joined: Wed 21. Dec 2016 15:13:38
Posts: 574
Location: Germany
Hello,
short addendum, the telemetry and integration works also fine with ETHOS version 1.5.7 -
I have verified this again! For the time being I have version 1.5.7 of ETHOS installed -

Best regards !


Top
 Profile  
 
PostPosted: Sat 25. May 2024 9:30:48 
Offline

Joined: Wed 15. May 2024 21:21:38
Posts: 10
which device you are using?
I'm on ethos 1.5.7 and Spirit 2 with 3.6.2 no integration


Top
 Profile  
 
PostPosted: Sat 25. May 2024 10:45:13 
Offline

Joined: Wed 21. Dec 2016 15:13:38
Posts: 574
Location: Germany
Hello,
have you tried to flash back the firmware to 3.6.1 ?
For me only the 3.6.1 works the 3.6.2 doesn't work !

My configuration:

Transmitter:
Horus X10S Express with ETHOS 1.5.7 and newest firmware for internal module 2.1.10 (19.10.2023)

ESC: YGE Aureus 135
FBL: Spirit GT , Firmware 3.6.1
Receiver: Archer R8 Pro (FW 2.1.14) and Archer RS (FW 2.1.10) linked via SBUS IN (Archer R8 Pro)-->Signal Redundancy

Best Regards


Top
 Profile  
 
PostPosted: Sun 26. May 2024 13:25:01 
Offline

Joined: Wed 10. May 2023 9:36:53
Posts: 38
Location: The Netherlands
Mattes61 wrote:
Hello,
short addendum, the telemetry and integration works also fine with ETHOS version 1.5.7 -
I have verified this again! For the time being I have version 1.5.7 of ETHOS installed -

Best regards !


Thanks for that, just did a downgrade to Ethos ver1.5.6 as I see from the Ethos ver1.5.8 version release notes that Ethos ver1.5.7 has a performance issue.

Spirit Ethos integration is now working great :D with Spirit firmware version 3.6.1 on my GT.

ps- The Ethos downgrade was no fun, as it wiped out everything luckily I had a backup :shock:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 92 posts ]  Go to page 1, 2, 3, 4, 5 ... 10  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .