| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| RTH operation https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5866 |
Page 1 of 1 |
| Author: | jdowdlejr [ Wed 01. Nov 2023 16:01:12 ] |
| Post subject: | RTH operation |
I fly at 2 locations, at home, and at a field 7 miles away. Is there a danger that at home, my heli might try for some reason (recovery) to fly to a home location i have designated at my flying field 7 miles away?? Is there a max range range lockout option? If not that would make a very comforting addition to the next release. Also, an option for more than 1 rally points (alternate home locations) would be helpful, with the GeoLink selecting the closest one to go to. thanks for any assistance, |
|
| Author: | senaka [ Fri 03. Nov 2023 21:33:26 ] |
| Post subject: | Re: RTH operation |
afaik the home position gets initialised on every power on cycle. so when you power your helicopter wait for the satellite acquisition to complete that's the home position it will set. Have you tried geo-fence? this feature prevents the heli flying beyond a configured radius. |
|
| Author: | Pking [ Sat 04. Nov 2023 22:47:21 ] |
| Post subject: | Re: RTH operation |
senaka wrote: afaik the home position gets initialised on every power on cycle. so when you power your helicopter wait for the satellite acquisition to complete that's the home position it will set. Have you tried geo-fence? this feature prevents the heli flying beyond a configured radius. The position setting for RTH depends on how it’s programmed in the servo setting it can be set automatically at spool up but it as well can be set when you want only so make sure it configured like you want !! And testing is important.
|
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|