It is currently Mon 09. Dec 2024 15:43:47

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sat 02. Sep 2023 17:31:32 
Offline

Joined: Mon 16. Sep 2019 22:29:31
Posts: 51
Hello I would like to ask you to help me.
The following requirement:
Spirit RS, Geolink vers.1 update at RS to 3.5 at Geolink the latest update available.
In my opinion I have set everything correctly.
When switching on, whether now hold at altitude without a fixed pitch or when switching on with a fixed pitch,
the heli goes up by about 5m and then down.
This happens all the time. That means: the helicopter does not stand still at altitude.
My request to you, maybe someone knows how I can refine the settings so that the heli has one
can maintain a stable height.

With best thanks
Borni


Top
 Profile  
 
PostPosted: Sun 03. Sep 2023 8:47:31 
Offline
User avatar

Joined: Tue 10. Mar 2020 14:36:22
Posts: 370
Hi Börni

first point will be for sure to go through the troubleshooting guide: https://manual.spirit-system.com/index. ... leshooting

if that does not help, you should provide much more details about your setup ( heli model/type, servos, rpms, Spirit settings, etc) so one could be able to give a hint. without detail the troubleshooting guide is more/less the best hint!

_________________
cheers
Michael


Top
 Profile  
 
PostPosted: Sun 03. Sep 2023 21:08:54 
Offline

Joined: Mon 16. Sep 2019 22:29:31
Posts: 51
Hi Michael,
Thanks for your answer.
I have set and checked everything carefully.
All that remains is to find out the right percentage with the vertical setting.
The question arises: whether I should reduce or increase sensitivity in 5% steps at 80% sensitivity.
(By the way, the heli is a T-REX 600)
With many thanks and best regards.
Borni 1


Top
 Profile  
 
PostPosted: Mon 04. Sep 2023 6:48:34 
Offline
User avatar

Joined: Tue 10. Mar 2020 14:36:22
Posts: 370
the troubleshooting guide sasys: "For some models it is needed to decrease Vertical Correction Gain if model is doing visible corrections. You can start with the lowest number and increase it by 10 points in that case."

_________________
cheers
Michael


Top
 Profile  
 
PostPosted: Mon 04. Sep 2023 8:17:41 
Offline

Joined: Sun 08. Jan 2023 14:32:43
Posts: 291
Börni1 wrote:
Hello I would like to ask you to help me.
The following requirement:
Spirit RS, Geolink vers.1 update at RS to 3.5 at Geolink the latest update available.
In my opinion I have set everything correctly.
When switching on, whether now hold at altitude without a fixed pitch or when switching on with a fixed pitch,
the heli goes up by about 5m and then down.
This happens all the time. That means: the helicopter does not stand still at altitude.
My request to you, maybe someone knows how I can refine the settings so that the heli has one
can maintain a stable height.

With best thanks
Borni


don't go crazy
spirit with standard parameters during the flight the helicopter flies perfectly.
you think to have a good setup but is not so
or I have a trex 600 too and maybe if it's not the setup you will have high vibrations.
Can you record the vibrations?
but Before you go servo - subtrim and after put the blade the same in the video.
Do your blades touch?
https://www.youtube.com/watch?v=x1aFSfl1wsk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .