It is currently Sat 02. Dec 2023 0:01:30

All times are UTC + 1 hour





Post new topic Reply to topic  [ 42 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 31. Jul 2023 14:58:10 
Offline

Joined: Sun 18. Apr 2021 16:54:57
Posts: 211
ok, bist du invert geflogen ?

toni67 wrote:
Dr.Fleming wrote:
Welchen Rettungs Modus hast du aktiviert !


Normal.
Siehe 1. Post


Top
 Profile  
 
PostPosted: Mon 31. Jul 2023 15:01:18 
Offline

Joined: Wed 21. Dec 2016 15:13:38
Posts: 469
Location: Germany
deleted !


Top
 Profile  
 
PostPosted: Mon 31. Jul 2023 21:04:49 
Offline

Joined: Fri 02. Dec 2022 12:27:33
Posts: 32
Hello together and thank you very much,

ZeXx68:

No other features were engaged. Only altitude limit. I'm not using different banks.

The vibrations are not very low. Please have a look on the attached chart.


Franz88:

For channels please have a look on my first post. It's attached. All Channels are from -100 to +100 (Jeti). The altitude limit (channel 14) is activated with +100 in radio and Spirit, deactivated with -100.


all others:

Yes, it was normal mode. So the heli should have to rescue with base downwards in every case. But the heli turned upside down in the moment of rescue by itself.


Kind regards

Tanja


Attachments:
Bildschirmfoto 2023-07-31 um 21.35.49.png
Bildschirmfoto 2023-07-31 um 21.35.49.png [ 144.05 KiB | Viewed 114 times ]
Top
 Profile  
 
PostPosted: Tue 01. Aug 2023 1:14:17 
Offline

Joined: Fri 02. Dec 2022 12:27:33
Posts: 32
Rebuild after crash


Attachments:
IMG_5822.jpg
IMG_5822.jpg [ 708.72 KiB | Viewed 108 times ]
IMG_5821.jpg
IMG_5821.jpg [ 836.74 KiB | Viewed 108 times ]
Top
 Profile  
 
PostPosted: Tue 01. Aug 2023 11:39:51 
Offline

Joined: Fri 02. Dec 2022 12:27:33
Posts: 32
New settings after rebuild. Should this work?


Attachments:
2023-08-01 Neuaufbau.4ds [255 Bytes]
Downloaded 10 times
Top
 Profile  
 
PostPosted: Tue 01. Aug 2023 16:49:12 
Offline

Joined: Sun 08. Jan 2023 14:32:43
Posts: 206
altitude limit it has two activations ON1 and ON2 based on the channel value assigned to the switch
in general channel what is written to you? (on1 or on2)
this settings you only see them with the radio turned on

let me understand but you use altitude limit and normal recovery?
why if active altitude limit and after you use normal rescue altitude limit takes the altitude than when you activated normal rescue.
This happened to me, but the rescue normal It has always worked fine for me.
only that between altitude limit and rescue normal the priority goes to rescue normal.
but he's always been good to me.
Only if you activate altitude limit and then you activated the normal rescue you should disable and re-enable altitude limit.
But is it possible to have all these functions active?
Attachment:
Immagine.jpg
Immagine.jpg [ 133.33 KiB | Viewed 80 times ]

why in stabi mode you can only choose one option
Attachment:
Immagine22.jpg
Immagine22.jpg [ 96.96 KiB | Viewed 80 times ]



PS
please write english.


Top
 Profile  
 
PostPosted: Tue 01. Aug 2023 17:31:35 
Offline

Joined: Fri 02. Dec 2022 12:27:33
Posts: 32
I'm sorry for confusing you. When the crash happened, I only used the altitude limit with Geo-Link in 5 Meter and normal rescue on a switch. When the altitude limit was engaged, the value was on (1).

Due to a mistake by myself, the Heli went downwards and the altitude limit was engaged. I did't pull the switch for rescue. Then the heli turned in inverted position. I tried to flip the Heli in upright position, but it wasn't possible. Then it crashed.

In the new settings, I try another way, without altitude limit. Because it's an Spirit GTR, I want to to use the automatic rescue with the barometer. On the rescue switch I only have the stabilisation, no more rescue with pitch. I hope this will work.

But I'm still very interested, why the crash happened...


Top
 Profile  
 
PostPosted: Tue 01. Aug 2023 18:35:01 
Offline

Joined: Sun 08. Jan 2023 14:32:43
Posts: 206
try using one function at a time


Top
 Profile  
 
PostPosted: Thu 03. Aug 2023 14:11:16 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12049
Hello,

I have checked your settings. I found that you are not using GeoLink Altitude Limit at all.
Instead you are using Rescue (Automatic) which is feature directly from GTR.
Are you aware of this? Altitude for the automatic rescue is programmed during flight, not from the software.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 03. Aug 2023 17:11:36 
Offline

Joined: Fri 02. Dec 2022 12:27:33
Posts: 32
Hi,

thank you for checking the settings. I am aware of this. As long as I don't know what happened with the altitude limit when I crashed, I don't want to use it with the Geo-Link anymore. So I changed to the automatic rescue of the GTR.

Do you have an idea, why the heli turned and stayed in the inverted position while normal rescue with altitude limit? I want to make sure, that it's not an hardware issue, what can happen again. It doesn't feel good.

Kind regards

Tanja


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 42 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: urgno and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .