It is currently Fri 29. Mar 2024 6:23:17

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 30. May 2023 15:49:03 
Offline

Joined: Fri 05. Oct 2018 15:19:16
Posts: 10
I followed the Spirit GT manual for Tribunus II ESC, Futaba R7003SB S-Bus receiver, and Futaba 14SG Transmitter for telemetry set up. The sensor page in Tx shows 8-16 slots with Kontronik listed. When I power everything up the Tx in the telemetry page shows the various telemetry parameters but no values. What am I missing? Please help. Thanks.


Top
 Profile  
 
PostPosted: Wed 31. May 2023 7:23:41 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

how is your receiver wired?
Are you using SBUS2 slot of the receiver?

Is Scorpion set for correct telemetry protocol?
Is Spirit set for Scorpion telemetry?
Are you using Telem UNI cable for telemetry between Spirit GT and ESC?

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 31. May 2023 14:25:26 
Offline

Joined: Fri 05. Oct 2018 15:19:16
Posts: 10
Yes to everything except I am using Port 1 S. Bus from R7003SB Rx to RUD port in Spirit GT instead of S Bus2. I couldn’t seem to get a connection when using S Bus 2. This is probably my problem. So I should using the Sbus2 port for my primary connection to the RUD port in the Spirit GT unit? The Spirit manual was not clear on this. Thanks.


Top
 Profile  
 
PostPosted: Thu 01. Jun 2023 20:57:44 
Offline

Joined: Fri 05. Oct 2018 15:19:16
Posts: 10
Delete


Top
 Profile  
 
PostPosted: Fri 02. Jun 2023 13:05:48 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
It is needed to enable the SBUS output. By default it might be off.
It should be explained in the receiver's manual.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sat 03. Jun 2023 1:59:21 
Offline

Joined: Fri 05. Oct 2018 15:19:16
Posts: 10
Ok, I’ll check that. Thanks.


Top
 Profile  
 
PostPosted: Sat 03. Jun 2023 14:33:01 
Offline

Joined: Fri 05. Oct 2018 15:19:16
Posts: 10
Customer, user brain malfunction. I had the connector reversed (polarity) when I switch from the Sbus port to the Sbus 2 port. All telemetry working now. Really appreciate your help and time to point me in the right direction. Also The Spirit 2 is flying good.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .