It is currently Fri 29. Mar 2024 6:02:16

All times are UTC + 1 hour





Post new topic Reply to topic  [ 227 posts ]  Go to page Previous  1 ... 10, 11, 12, 13, 14, 15, 16 ... 23  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 13. Mar 2023 13:57:02 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Then it works correctly. Your model is producing too low vibrations without blades.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 13. Mar 2023 14:04:57 
Offline

Joined: Tue 10. Dec 2019 10:46:57
Posts: 85
Ok, thanks i will test the value during flight


Top
 Profile  
 
PostPosted: Mon 13. Mar 2023 20:02:50 
Offline

Joined: Sun 28. Mar 2021 10:43:14
Posts: 17
Hello,
will there be a new version of the LUA with the missing functions?
Like the parameters of the governor or reading out the event log.


Top
 Profile  
 
PostPosted: Fri 17. Mar 2023 20:55:11 
Offline

Joined: Wed 08. Oct 2014 11:21:06
Posts: 70
Location: sydney,australia
Also interested in the missing pages of the ethos lua scripts(governor,logs ,servo travel correction etc). Is this something that is going to be updated in the near future? Would be very handy to have. Thankyou.


Top
 Profile  
 
PostPosted: Sat 18. Mar 2023 19:05:36 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Certainly there will be update as we are doing for everything else.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sat 18. Mar 2023 23:28:06 
Offline

Joined: Thu 05. Jan 2023 17:33:04
Posts: 3
Location: Missouri, US
ZeXx86 wrote:
Hello,

this is very good. FrSky told us that S.Port is not supported for EthOS and integration.
We know that it works with some receivers but we dont know if this support will still work in the future.
We hope that yes. The list of tested receivers could be great.

Just FYI:
I reached out to my main HQ contact at FrSky and he said that S.Bus/S.Port integration have always been supported on FrSky's side, and it will always be supported. Since to my (and his) knowledge, the Lua/integration script is agnostic to the communication protocol used between RX and FC.

If you find a receiver that does not work with integration, regardless of protocol it uses, let me know - it's likely something in the firmware and can be fixed, assuming it has already been confirmed to not be something on the Spirit firmware/Lua side.

The reason I am just now replying to this is because I had the thread bookmarked on Page11 and failed to notice it had moved on by a couple pages :D

_________________
Keith


Last edited by Bladescraper on Sun 19. Mar 2023 17:09:37, edited 1 time in total.

Top
 Profile  
 
PostPosted: Sun 19. Mar 2023 4:22:27 
Offline

Joined: Mon 24. Oct 2022 5:39:06
Posts: 69
Bladescraper wrote:

If you find a receiver that does not work with integration, regardless of protocol it uses, let me know - it's likely something in the firmware and can be fixed.


If you're looking for receivers that DON'T work with S-BUS /S.Port, then you don't need to look any further than the first post.

RX4R, RX6R, R-XSR, Archer RS, Radiomaster R161, RadioMaster R168.

I know the Radiomaster receivers are not FrSky, rather they're D16 clones, but by the same token, this should also affect any D16 compatible receivers FrSky included.


Top
 Profile  
 
PostPosted: Fri 24. Mar 2023 22:17:49 
Offline

Joined: Sun 27. Sep 2020 19:31:06
Posts: 10
I had good luck with the 3.5.0 firmware, X20s, Archer R4, Spirit2 and integration cable using f.port - everything seems to work in lua script on ethos.


Top
 Profile  
 
PostPosted: Tue 28. Mar 2023 16:05:52 
Offline

Joined: Tue 10. Dec 2019 10:46:57
Posts: 85
I have now testet Position Hold and Altitude Hold.
Both function works very well.
Sometimes the helicopter pumps around the set altitude.
I think this is due to the low vertican gain and the wind, because my Goblin Buddy is very sensitive to pitch.
I think the software works very well


Top
 Profile  
 
PostPosted: Tue 28. Mar 2023 18:29:02 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
S.PORT integration always worked with FrSky from the beginning, this is true. But not with EthOS. They want to move away from this protocol and use new F.BUS. We also recommend it since it is faster and more reliable protocol. At least in theory. In practise it will show later.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 227 posts ]  Go to page Previous  1 ... 10, 11, 12, 13, 14, 15, 16 ... 23  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .