It is currently Fri 29. Mar 2024 16:13:50

All times are UTC + 1 hour





Post new topic Reply to topic  [ 14 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 29. Nov 2022 21:34:36 
Offline

Joined: Sun 06. Feb 2022 16:39:32
Posts: 61
And here the configs.


Attachments:
Protos 380 V2 B0.4ds [255 Bytes]
Downloaded 9 times
Kraken 580 standart B0.4ds [255 Bytes]
Downloaded 6 times
Top
 Profile  
 
PostPosted: Thu 01. Dec 2022 14:54:31 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

thank you very much for the settings.

I checked your settings and it is looking good.
I recommend to check this:
1. Enable Servos/Subtrim (Tuning) menu end verify that all servo arms are really in the middle (perpendicular to push rods).
2. At the same time there should be 0° between main blades and swashplate should be level.

Error could be caused also by some kind of mixing in the radio.
We never heard about such issue, so I think that maybe in your radio there is a mix. You can verify it on the bench by disconnecting motor and disarming the throttle hold.

When moving with elevator stick, only elevator channel must move.
When moving with aileron stick, only aileron channel must move.
These two are very important to check.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 01. Dec 2022 23:42:32 
Offline

Joined: Sun 06. Feb 2022 16:39:32
Posts: 61
Hi

I checked the radio twice. I even used a different one to be sure.

How do you set the position for the tail?


Top
 Profile  
 
PostPosted: Sat 03. Dec 2022 10:16:26 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
On some helicopters the tail can be rotated on the boom. The most of todays helicopters will not allow rotating the tail hub, so I believe this is not the problem on your models.
However it very strange and I can`t find any good explanation. Possibly only unit mounting could cause this if there is everything else OK.
We never experienced such issue unfortunately. Is is even more strange as it happens on both of your models which seems rather something in the radio.

What you can try is to increase Stick Deadband in the Expert Settings to maybe 30 and see if it helps.

Then please make sure that unit is mounted really precisely in all 3 axes with respect to the main rotor.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ]  Go to page Previous  1, 2

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .