It is currently Fri 29. Mar 2024 9:28:25

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sat 08. Apr 2023 23:07:45 
Offline
User avatar

Joined: Wed 12. Oct 2022 22:27:02
Posts: 2
Hi guys,
How can I use the AUX port as a switching channel as it´s described for a landing gear or lights?
I have a 1st cap buffer and would like to switch it on/off thru the AUX port.

I tried a channel 9 assignment in the functions panel (output to AUX). The switch is working but has no affect on the connected cap buffer.
FW: 3.4.3
TX: Jeti DS-16

Thanks in advance.


Top
 Profile  
 
PostPosted: Sun 09. Apr 2023 11:27:26 
Offline

Joined: Wed 21. Dec 2016 15:13:38
Posts: 480
Location: Germany
Hi,
I have also an 1st-Buffer with three cables +, - and Signal on it - my first consideration was to do that in the same way as you - but I haven't tested it myself yet, it will take a while, but I suspect that the firmware of the 1st buffer may not have implemented it yet, I seem to remember that there was a "*" after the specification and at the bottom, it will be possible in a later version (firmware) - but as soon as I get around to it, I'll still check whether it's already working and let you know -

Regards

Short addendum, try it with aux2...:
Attachment:
Screenshot 2023-04-09 123020.jpg
Screenshot 2023-04-09 123020.jpg [ 123.62 KiB | Viewed 157 times ]


Top
 Profile  
 
PostPosted: Sun 09. Apr 2023 16:19:03 
Offline
User avatar

Joined: Tue 10. Mar 2020 14:36:22
Posts: 352
... it is working as you explained - at least on mine. the buffer can only be switched off when the buffer is supplying the power (main battery disconnected). as long as main battery is connected the buffer will ignore on/off switching signal from Tx (which makes perfect sense to me).

_________________
cheers
Michael


Top
 Profile  
 
PostPosted: Fri 16. Jun 2023 19:23:55 
Offline
User avatar

Joined: Wed 12. Oct 2022 22:27:02
Posts: 2
Even with GTR FW, V3.5 it´s still not working with 'F:Output to Aux' and a connected CAP at the AUX port.
But it´s working with 'F:Output to CH0' and connection to CH0 port (default= 2. elevator servo).

I tried it with 1st-buffer and IISI-RC cap.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .