It is currently Thu 28. Mar 2024 19:19:27

All times are UTC + 1 hour





Post new topic Reply to topic  [ 2 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sun 09. Oct 2022 0:01:22 
Offline

Joined: Sat 08. Oct 2022 23:51:16
Posts: 1
Hello,

So I installed a Spirit FBL on my Oxy4 with a Futaba 10j Radio and HW ESC. I got the Sbus adapter cable and hooked everything up and it was working fine then I unhooked everything, removed the main head unit to do the swashplate leveling and reinstalled all the servo and ESC, Sbus wire connections and now I get no movement from the servos when actuating the sticks on the radio.

I'm not sure if I plugged in the Sbus cable incorrectly when reinstalling and either fried the cable or the actual unit but the LED is solid until I turn on the Radio and it has a slow blink now. I verified all the servos still work and hooked them up to my Rx and they work that way but not when all installed into the unit.

This is seriously drving my crazy and hopefully someone on here can help with suggestions as to how to figure out whats going wrong.

Thanks in advance!


Top
 Profile  
 
PostPosted: Thu 15. Jun 2023 23:38:58 
Offline

Joined: Thu 27. Jul 2017 23:41:59
Posts: 7
Old topic but Im having the same exact issue hooking up a frsky via sbus. Was working fine but now not. Bad cable?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .