It is currently Thu 28. Mar 2024 13:16:49

All times are UTC + 1 hour





Post new topic Reply to topic  [ 15 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 22. Sep 2022 18:09:38 
Offline

Joined: Mon 30. Oct 2017 23:47:38
Posts: 160
Hi,

I am using telemetry with a YGE 65 on a Spirit GT what do I configure for the « sensing divider » ?

Got the latest version but number can’t be 21, in the spirit menu it says divide number of poles by 2 and I think it is max 12 that the menu accepts.

Here is the motor specification :

* Motor Setup:
- POLES 42, KV 200. - RATIO 1:1


Last edited by Pking on Mon 26. Sep 2022 22:09:58, edited 4 times in total.

Top
 Profile  
 
PostPosted: Thu 22. Sep 2022 19:12:09 
Offline

Joined: Wed 04. Jul 2018 18:03:55
Posts: 175
From the news section...

Updated Governor:

Support for new Goblin RAW 420.
Sensing Divider has range up to 32.


Top
 Profile  
 
PostPosted: Thu 22. Sep 2022 20:22:01 
Offline

Joined: Mon 30. Oct 2017 23:47:38
Posts: 160
10x wrote:
From the news section...

Updated Governor:

Support for new Goblin RAW 420.
Sensing Divider has range up to 32.


Thanks, i do remember but it still does not enable me to input that value. I migrated a existing configuration from another heli to the GT.

Here are my 3 config files using windows 3.4.3 and to make sure I re-flashed again 3.4.3 and i am limited to 14 poles using YGE. (I tried using HW and still limited at 14)

Thanks

Added on sep 24th: i tried in the demo mode and still limited to 14.


Attachments:
2raw420.4ds [255 Bytes]
Downloaded 7 times
1raw420.4ds [255 Bytes]
Downloaded 6 times
0raw420.4ds [255 Bytes]
Downloaded 7 times
Top
 Profile  
 
PostPosted: Mon 26. Sep 2022 12:09:35 
Offline

Joined: Mon 30. Oct 2017 23:47:38
Posts: 160
Hi Thomas,

I understand by not seeing you answer that this make take time to correct.

I have not Maiden this heli yet, can you explain how the pole are used to calculate the speed ? I could at a minimum put 10 poles (around 1/2 of the 21) to start and multiply by 2,1 and get the real speed ?
I don’t know how the pole are used to get the speed reading.

Thanks


Top
 Profile  
 
PostPosted: Mon 26. Sep 2022 12:14:38 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

there is nothing to correct.
It is enough to update both firwmare and software to the latest version and it will work.
You can set Sensing Divider to 32 without any problem.

ESC brand is not playing any role there.


Attachments:
Screenshot_20220926_131911.png
Screenshot_20220926_131911.png [ 123.65 KiB | Viewed 221 times ]

_________________
Spirit System developer
Top
 Profile  
 
PostPosted: Mon 26. Sep 2022 12:56:55 
Offline

Joined: Mon 30. Oct 2017 23:47:38
Posts: 160
Hi Thomas,

Your are showing the Governor menu in your reply.

I am using the « telemetry menu » with YGE where you ask for number of poles and divided by 2.

Is that information in telemetry used to return the RPM ? Or for the other features, I will use the GT feature of logging playback.

I am not using the gov at the moment

Thanks


Last edited by Pking on Mon 26. Sep 2022 13:00:26, edited 1 time in total.

Top
 Profile  
 
PostPosted: Mon 26. Sep 2022 13:00:25 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Ah, this was not clear previously.
Parameter is shared between these windows. You can set the value in Governor menu too.
If the problem was only in the Telemetry window, then please download and install the Spirit Settings 3.4.3 software once again.
I hope all will be fine.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 26. Sep 2022 13:06:30 
Offline

Joined: Mon 30. Oct 2017 23:47:38
Posts: 160
ZeXx86 wrote:
Ah, this was not clear previously.
Parameter is shared between these windows. You can set the value in Governor menu too.
If the problem was only in the Telemetry window, then please download and install the Spirit Settings 3.4.3 software once again.
I hope all will be fine.
Ok will try


Top
 Profile  
 
PostPosted: Mon 26. Sep 2022 22:13:12 
Offline

Joined: Mon 30. Oct 2017 23:47:38
Posts: 160
ZeXx86 wrote:
Ah, this was not clear previously.
Parameter is shared between these windows. You can set the value in Governor menu too.
If the problem was only in the Telemetry window, then please download and install the Spirit Settings 3.4.3 software once again.
I hope all will be fine.


Hi Thomas,

it works now in Telemetry at 21 for Pole/2

I had 3.4.3 downloaded on 2 computers, i did as you said and dowloaded again and it worked. I checked my other computer and it was still blocked at 14, after download it's resolved on this one as well.

Do you have a explanation why the first 3.4.3 download did not work ? Did you change something ? I would like to understand for future changes.
Thanks !


Top
 Profile  
 
PostPosted: Tue 27. Sep 2022 18:09:25 
Offline

Joined: Wed 21. Dec 2016 15:13:38
Posts: 480
Location: Germany
Hello,
I think there was something changed afterwards...

Regards
Matthias

Attachment:
Screenshot 2022-09-27 343_pre.jpg
Screenshot 2022-09-27 343_pre.jpg [ 230.31 KiB | Viewed 161 times ]


Attachment:
Screenshot 2022-09-27 343_post.jpg
Screenshot 2022-09-27 343_post.jpg [ 244.6 KiB | Viewed 161 times ]


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .