It is currently Thu 28. Mar 2024 17:58:55

All times are UTC + 1 hour





Post new topic Reply to topic  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sat 03. Sep 2022 11:55:04 
Offline

Joined: Sat 06. Nov 2021 17:02:26
Posts: 5
Used and tested Geolink v2 on two different helis. On both, Geolink v2 stopped working after latest 2 minutes. I have sent the unit to Thomas for checking. Came back after two weeks without any comment nor any testdocument! Same behavior today on the airfield. Newest firmware installed on both. Slowly - I‘m sick of it!


Top
 Profile  
 
PostPosted: Sat 03. Sep 2022 11:57:34 
Offline
User avatar

Joined: Sun 09. Jun 2013 13:14:17
Posts: 962
Location: Plzeň
Please update unit on latest fw 3.4.2 and Geolink on 1.3.1 via sw 3.4.2
This bug is repared.

_________________
Spirit System (Spirit W1, RS & GTR & all the others)
Spirit Wave & JETI DS 12
http://www.habada.cz


Top
 Profile  
 
PostPosted: Sat 03. Sep 2022 12:04:20 
Offline

Joined: Thu 11. Jun 2020 8:20:42
Posts: 41
It is latest firmware. Both on Spirit and on geolink. I am standing beside the heli (friend on the airfield).

And no errors in the log. Just the blue light went out during flight.

In Austria we say: I hope Geolink v2 was not a grab into the toilett :-) (sorry).

Alex


Top
 Profile  
 
PostPosted: Mon 05. Sep 2022 6:01:18 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

we examined your module and also tested on our models to make sure your GeoLink is working well.
It was perfect in all conditions fortunately. We did the update to 1.3.1 to make sure the problem you described will not appear again.
Can you make sure that you still have version 1.3.1 in the GeoLink v2?

Thank you!

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 07. Sep 2022 10:48:28 
Offline

Joined: Sat 06. Nov 2021 17:02:26
Posts: 5
But very strange - my colleague (AlexFromTelfs) which is operating his v2 at the same place without any problems!? And I confirm, I have the newest Firmware installed. On both, Spirit GT and v2. And I have flown the v2 on two different helis. Same result…. !


Top
 Profile  
 
PostPosted: Wed 07. Sep 2022 14:13:38 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
In this case it will be best to ship you new GeoLink v2 and you can verify the behavior with your Spirit units.
Thank you for the message! Tomorrow we will ship.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 09. Sep 2022 11:09:51 
Offline

Joined: Sat 06. Nov 2021 17:02:26
Posts: 5
OK, thank you very much. Keep you informed.


Top
 Profile  
 
PostPosted: Wed 14. Sep 2022 15:58:31 
Offline

Joined: Sat 06. Nov 2021 17:02:26
Posts: 5
Today I went to the airfield. First I flew with my own v2. Same behavior as before. Then I have mounted the „new“ v2 on the same heli. And it worked really nice and without any problems! So I will send you „my“ v2 back tomorrow. Seems that it has a failure in the circuit. As soon as it is heated up under operating condition it stops working.
So, for me the problem is SOLVED. Thank you very much for your service.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: franz88 and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .