|
It is currently Sun 16. Jun 2024 6:02:41
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 4 posts ] |
|
| Author |
Message |
|
Dieter
|
 Posted: Sun 28. Aug 2022 21:08:10 |
|
Joined: Tue 24. Aug 2021 0:04:47
Posts: 30
|
|
This evening i tested new geolink V2. FW 1.3.1.
Z axis very bad. By altitude holld, altitude limit and rth the heli jumps up and down. Not able to fly with this functions.
Dieter
Last edited by Dieter on Sun 28. Aug 2022 21:12:31, edited 1 time in total.
|
|
| Top |
|
 |
|
ZeXx86
|
Posted: Sun 28. Aug 2022 21:11:55 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12303
|
|
Hello,
can you send your settings please?
Also any detail about your helicopter would be very useful.
GeoLink firmware 1.3.1 is not changing behavior at all. It is same as 1.3.0 in terms of control of the model.
There were only small changes in functions such as Position Hold, Return to Home and Geo-fence with Spirit firmware 3.4.2.
But altitude is unaffected, same as older version 3.4.1, 3.4.0, ..
This thread is missing any subject description, so I will update it for better orientation.
_________________
Spirit System developer
|
|
| Top |
|
|
|
Dieter
|
Posted: Sun 28. Aug 2022 21:17:52 |
|
Joined: Tue 24. Aug 2021 0:04:47
Posts: 30
|
|
Thank you for quick Answer. Hell acrobat se Plöchinger, last week with geolink v1 all o.k. I will send my settings tomorrow..
Dieter
|
|
| Top |
|
|
|
Dieter
|
Posted: Mon 29. Aug 2022 13:49:48 |
|
Joined: Tue 24. Aug 2021 0:04:47
Posts: 30
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 4 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 16 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
