| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Trouble binding on spirit gt https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5313 |
Page 1 of 1 |
| Author: | mb-1953 [ Fri 29. Jul 2022 20:33:40 ] |
| Post subject: | Trouble binding on spirit gt |
I just replaced a spirit 2 with a spirit gt. The firmware is 3.4.1, bind plug in pit/elev/ port for dsmx. The satellites blink but every time the bind fails. I've tried a variety of satellites and new wires. any help would be appreciated. |
|
| Author: | Mattes61 [ Sat 30. Jul 2022 15:33:32 ] |
| Post subject: | Re: Trouble binding on spirit gt |
Hello mb-1953, sometimes the distance from the transmitter to the sattelites are to short, then binding fails - try an wider distance - If this doesn't work, do you have an spektrum receiver with satellite-Ports ? Try to bind the satellites with the receiver with the respective modelmemory - Push in some battery 4-Cells (NiMh) in the receiver for power supply and try to bind with the transmitter - If they are binded you can put the satellites into the spirit and bindig in spirit isn't necessary any more - The bindig is only a thing between receiver and transmitter and not a thing of spirit... Regards Matthias |
|
| Author: | ZeXx86 [ Sat 30. Jul 2022 15:40:05 ] |
| Post subject: | Re: Trouble binding on spirit gt |
Please make sure to select correct frame rate in the radio. If it is for example DX6 then it can bind only at 22ms. |
|
| Author: | mb-1953 [ Sun 31. Jul 2022 12:29:25 ] |
| Post subject: | Re: Trouble binding on spirit gt |
I tried various distances, won't bind. The frame rate is 22ms. I have over 20 helicopters and all with spirit and have never had a problem binding before. The radio is an IX12. Any other suggestions? |
|
| Author: | Mattes61 [ Mon 01. Aug 2022 8:02:24 ] |
| Post subject: | Re: Trouble binding on spirit gt |
As above said, it has nothing to do with the Spirit FBL, try it in another way with an receiver as also above said - Maybe you have an problem with your IX12 ? Regards |
|
| Author: | ZeXx86 [ Mon 01. Aug 2022 8:24:06 ] |
| Post subject: | Re: Trouble binding on spirit gt |
In this case you have to bind with two bind plugs. One at SYS port and one at ELE/PIT/AIL. This will initiate 22ms binding process. iX require 22ms frame rate in order that all channels are working. So please try two binds plugs. I hope this will help. |
|
| Author: | mb-1953 [ Mon 01. Aug 2022 11:17:15 ] |
| Post subject: | Re: Trouble binding on spirit gt |
I bound the satellites to an new Spirit GT, and transferred them to the one with the issue. Now connected. Thanks for the help. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|