It is currently Thu 28. Mar 2024 10:44:44

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Fri 29. Jul 2022 20:33:40 
Offline

Joined: Tue 03. Mar 2015 15:55:50
Posts: 98
I just replaced a spirit 2 with a spirit gt. The firmware is 3.4.1, bind plug in pit/elev/ port for dsmx. The satellites blink but every time the bind fails. I've tried a variety of satellites and new wires. any help would be appreciated.


Top
 Profile  
 
PostPosted: Sat 30. Jul 2022 15:33:32 
Offline

Joined: Wed 21. Dec 2016 15:13:38
Posts: 480
Location: Germany
Hello mb-1953,
sometimes the distance from the transmitter to the sattelites are to short, then binding fails - try an wider distance - If this doesn't work, do you have an spektrum receiver with satellite-Ports ? Try to bind the satellites with the receiver with the respective modelmemory - Push in some battery 4-Cells (NiMh) in the receiver for power supply and try to bind with the transmitter - If they are binded you can put the satellites into the spirit and bindig in spirit isn't necessary any more -
The bindig is only a thing between receiver and transmitter and not a thing of spirit...

Regards
Matthias


Top
 Profile  
 
PostPosted: Sat 30. Jul 2022 15:40:05 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Please make sure to select correct frame rate in the radio.
If it is for example DX6 then it can bind only at 22ms.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sun 31. Jul 2022 12:29:25 
Offline

Joined: Tue 03. Mar 2015 15:55:50
Posts: 98
I tried various distances, won't bind. The frame rate is 22ms. I have over 20 helicopters and all with spirit and have never had a problem binding before. The radio is an IX12.
Any other suggestions?


Top
 Profile  
 
PostPosted: Mon 01. Aug 2022 8:02:24 
Offline

Joined: Wed 21. Dec 2016 15:13:38
Posts: 480
Location: Germany
As above said, it has nothing to do with the Spirit FBL, try it in another way with an receiver as also above said -
Maybe you have an problem with your IX12 ?

Regards


Top
 Profile  
 
PostPosted: Mon 01. Aug 2022 8:24:06 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
In this case you have to bind with two bind plugs. One at SYS port and one at ELE/PIT/AIL. This will initiate 22ms binding process.
iX require 22ms frame rate in order that all channels are working. So please try two binds plugs.
I hope this will help.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 01. Aug 2022 11:17:15 
Offline

Joined: Tue 03. Mar 2015 15:55:50
Posts: 98
I bound the satellites to an new Spirit GT, and transferred them to the one with the issue. Now connected. Thanks for the help.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .