It is currently Thu 28. Mar 2024 20:20:13

All times are UTC + 1 hour





Post new topic Reply to topic  [ 27 posts ]  Go to page Previous  1, 2, 3
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 20. Jul 2022 19:20:47 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
I will contact you tomorrow and see if we can find a solution.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 22. Jul 2022 16:19:21 
Offline

Joined: Thu 05. Oct 2017 20:06:35
Posts: 305
That would be great, thanks.


Top
 Profile  
 
PostPosted: Fri 22. Jul 2022 17:46:12 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
If possible, I recommend to check Flight Log from Spirit after landing.
I would look for any GeoLink corrupted frames or errors in connection.

If all this seems OK, the only thing that remind is I can send you special firmware where you can adjust gains in a different way to avoid overshooting.
So during next week we can do this if you will not find a solution.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 22. Jul 2022 17:49:13 
Offline

Joined: Thu 05. Oct 2017 20:06:35
Posts: 305
I'm using a spirit 2. Do I need to keep the battery connected to recover the log after a flight, or is it ok to disconnect battery and travel home, then reconnect battery to get the log?


Top
 Profile  
 
PostPosted: Fri 22. Jul 2022 19:01:20 
Offline

Joined: Thu 06. Sep 2018 0:21:37
Posts: 71
A major log like "Geolink connection lost" will be saved even when the Spirit is powered off. You can tell if there is a major log saved as the swashplate will do a different dance on the next power on.


Top
 Profile  
 
PostPosted: Sat 23. Jul 2022 9:52:50 
Offline

Joined: Thu 05. Oct 2017 20:06:35
Posts: 305
The swash movement at start-up is so subtle, I've never really noticed any difference.

Anyway, attached is my flight log. I borrowed someone's laptop so I could get the log off the spirit 2 at the field.

I spooled up at about 00:30. I gained height then activated pos + alt hold. I let it sit there for about 5 mins whilst using the cyclic to move the heli in the XY plane.

I then disabled pos + alt hold at about 05:30 mins, and did some pitch pumps to test out some other settings I'm playing with.

I landed at about 07:00 mins. I left the heli powered up and downloaded the logs at about 10mins.


Attachments:
spirit-log-2022-07-23-092242.pdf [69.67 KiB]
Downloaded 20 times
Top
 Profile  
 
PostPosted: Mon 25. Jul 2022 8:59:36 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
Hello,

thank you for all the details.

We have prepared special firmware for you, where vertical correction gain is internally lowered by 10x.
So if you will set 100, it will work as 10 with the firmware.
You should see it in the firmware list. If not, please let me know.
No other changes are needed after update.

If lowering gain will still not work ideally, we will make a further changes until it will work perfectly.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 27 posts ]  Go to page Previous  1, 2, 3

All times are UTC + 1 hour


Who is online

Users browsing this forum: 10x, franz88 and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .