Spirit System
https://www.spirit-system.com/phpBB3/

Want auto rescue to stop piro, then recover
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5252
Page 1 of 1

Author:  Heli_Chris [ Mon 20. Jun 2022 15:35:54 ]
Post subject:  Want auto rescue to stop piro, then recover

I would like auto rescue to override my tail input and stop pirouetting and then recover. I think it will be cleaner and easier on the airframe.

I use auto rescue when Im doing advanced piro type stuff and need to keep my mind engaged always and never give up, so when the heli hits the virtual hard deck, I will still be trying to fly it to save it so I want it to take full control from me.

It seems that during rescue tail control is always fully functional from the stick, maybe there is a setting to override the tail control and stop piro'ing? Thx!

Author:  HeliMLM [ Tue 05. Jul 2022 8:03:40 ]
Post subject:  Re: Want auto rescue to stop piro, then recover

Hi

just thinking of the same... as i am using Auto Rescue about the same way (just for practicing new piro things). Auto Rescue will do it's thing - but i am still with the sticks far off center which is resulting in strange rescue result in the first moments until i center the sticks....

would it be enough to just set sticks priority to 0? any risk with that being done?

Author:  Heli_Chris [ Sun 10. Jul 2022 18:26:45 ]
Post subject:  Re: Want auto rescue to stop piro, then recover

Setting stick priority to 0 takes control away from the cyclic inputs during rescue, but the tail still remains completely active. Im getting used to letting go of the rudder when it rescues, but a way to get it to auto neutralize the tail rotation before rescue would ve very sweet

Author:  azaz44 [ Sat 16. Jul 2022 11:50:13 ]
Post subject:  Re: Want auto rescue to stop piro, then recover

Not sure what radios you're using, but with OpenTX it would be trivial to force rudder to 0 when rescue switch is on. Same with Jeti, and probably Futaba too.

Author:  Heli_Chris [ Wed 20. Jul 2022 2:10:18 ]
Post subject:  Re: Want auto rescue to stop piro, then recover

I use the Jeti .the main thing with virtual hard deck is no switch is activated when rescue kicks in.

Author:  azaz44 [ Thu 21. Jul 2022 9:21:04 ]
Post subject:  Re: Want auto rescue to stop piro, then recover

Heli_Chris wrote:
I use the Jeti .the main thing with virtual hard deck is no switch is activated when rescue kicks in.


Ahh it's auto-rescue. Then this will not work, sorry for confusion...

Author:  HeliMLM [ Mon 08. Aug 2022 12:26:30 ]
Post subject:  Re: Want auto rescue to stop piro, then recover

so maybe this is to be done via "feature request"? maybe it could be possible for Spirit unit to use stick priority 0 for tail too?

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/