It is currently Thu 28. Mar 2024 23:02:12

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 16. Jun 2022 18:52:10 
Offline

Joined: Thu 16. Jun 2022 18:44:42
Posts: 4
Hello,

I tested the automatic rescue for a colleague on the Spirit today. flew to about 10 meters, rescue activated. The heli started to save and stopped after about 2 seconds. So flown up and down, automatic rescue if the minimum height works fine.
Tested a second time, worked again. Tested a third time, nothing happened...
Has anyone ever had this? why does he save twice and not the third time?
The switch has not been touched in the meantime!
Unfortunately, now the trust is gone


Top
 Profile  
 
PostPosted: Fri 17. Jun 2022 10:38:57 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

the problem could happen if the switch for Automatic Rescue is turned off or if some other function is triggered. For example even if you are switching Banks and there is some other function programmed.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 17. Jun 2022 15:44:08 
Offline

Joined: Thu 16. Jun 2022 18:44:42
Posts: 4
Automatic rescue is placed on a switch, at about 10 meters height, I activated the rescue, it worked wonderfully twice, the third time with the back down, absolutely nothing happened. I didn't touch the switch in between, nor did I switch banks. That's the strange thing.


Top
 Profile  
 
PostPosted: Fri 17. Jun 2022 22:48:35 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
If model was rather upside down - I mean just 1° over vertical position then it is possible it was adding compensation factor. This is set in the software and for each model should be set differently.
Have you tried it upside down when model was level?
If model is vertical than pressure near the rotor head is very different too. So it can take just longer.
Have you tried lower altitude than expected? For example what happened after 3 meters under expected level?

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sun 19. Jun 2022 8:29:13 
Offline

Joined: Thu 16. Jun 2022 18:44:42
Posts: 4
Thank you for the tips, it works now, I set 6 meters as the difference


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .