Spirit System
https://www.spirit-system.com/phpBB3/

Wrong Altitude Values after update to 3.4.0
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5241		 Page 1 of 2
Author:  sacha [ Thu 09. Jun 2022 18:02:29 ]
Post subject:  Wrong Altitude Values after update to 3.4.0
Hi

System: Spirit GTR and Geolink.

After upgrading from 3.3.3 to 3.4.0 altitude values are wrong. Way to low.
Wrong on the telemetrydisplay on the jeti remote controller.
Also wrong on the jeti log chartviewer on the jeti remote controller (DS16)
Also wrong in jetistudio.

I attach two screenshots from jetistudio, one before upgrading to 3.4.0 and one after the update.

As always thanks for your help

Sacha

Attachments:
File comment: Altitude on v3.4.0
width3.4.0.png
width3.4.0.png [ 18.54 KiB | Viewed 409 times ]
File comment: Altitude on v 3.3.3 (Correct)
width3.3.3.png
width3.3.3.png [ 52.61 KiB | Viewed 409 times ]
Author:  Heligator [ Fri 10. Jun 2022 14:11:08 ]
Post subject:  Re: Wrong Altitude Values after update to 3.4.0
Greetings

As i read this post, i found out that i have the same Problem. After update Spirit System GTR to 3.4.0 including the radiocontroll software (BIN)
Altitude values are definitly wrong. My messurments in the log was between +-/4m what can't be truth.

Before the 3.4.0 Spirit update, all values were ok.

So any Guys have the same Problem ?

Attachments:
Bildschirmfoto 2022-06-10 um 15.12.53.png
Bildschirmfoto 2022-06-10 um 15.12.53.png [ 62.2 KiB | Viewed 372 times ]
Author:  proctormw [ Fri 10. Jun 2022 21:46:44 ]
Post subject:  Re: Wrong Altitude Values after update to 3.4.0
My altitude values all look to low also. I have geolink, updated bin and Spirit GT and with 3.4.0 update
Author:  HeliMLM [ Sat 11. Jun 2022 7:11:02 ]
Post subject:  Re: Wrong Altitude Values after update to 3.4.0
no problems here... did play around with the great new rescue engaging options - so I checked the logs afterwards to see if manual rescue could have any effect on auto rescue height. perfect height from 0 to 33m....
Author:  sacha [ Sat 11. Jun 2022 8:10:56 ]
Post subject:  Re: Wrong Altitude Values after update to 3.4.0
@HeliMLM

Are you using a SpiritGTR and a GeoLink ?

Thanks
Sacha
Author:  HeliMLM [ Sat 11. Jun 2022 13:43:02 ]
Post subject:  Re: Wrong Altitude Values after update to 3.4.0
... no, just Spirit GTs & GTRs!
Author:  Mattes61 [ Sat 11. Jun 2022 16:46:55 ]
Post subject:  Re: Wrong Altitude Values after update to 3.4.0
HeliMLM,
Sorry for saying that, you have not the same configuration - so it is not the same and not very helpful - sometimes I have the feeling that you are sponsored - maybe I am not right, but if two or three people have the same problem, then its not an coincidence -

Regards
Author:  sacha [ Mon 13. Jun 2022 12:29:44 ]
Post subject:  Re: Wrong Altitude Values after update to 3.4.0
In my debugging process i disabled the geolink in the spirit GTR configuration.

As you can see on the screenshot, altitude values are normal again.

Summery for 3.4.0
----------------------

Spirit GTR + Geolink:

Speed, lon and lat values are ok.
Altitude: broken

Spirit GTR without Geolink:

Altitude: ok
Other values not available because geolink is not used anymore.

I hope there will be soon a fix available.

Greetings

Sacha

Attachments:
withoutGeolink.jpg
withoutGeolink.jpg [ 53.49 KiB | Viewed 278 times ]
Author:  ZeXx86 [ Mon 13. Jun 2022 16:01:01 ]
Post subject:  Re: Wrong Altitude Values after update to 3.4.0
Hello,

thank you for the message.

We are looking into it. If there is something wrong we will fix it.
Author:  sacha [ Mon 13. Jun 2022 18:08:27 ]
Post subject:  Re: Wrong Altitude Values after update to 3.4.0
Many thanks.

If there is anything i can do to assist, let me know.

Sacha
Page 1 of 2 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/