It is currently Fri 01. Jul 2022 11:36:18

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 23. May 2022 2:20:19 
Offline

Joined: Wed 11. May 2022 3:54:26
Posts: 7
Hi Everyone,

Forgive me for my lack of knowledge or understanding around set ups for Spirit systems, I am just back to the hobby after many years away and things have certainly changed.
I am struggling with Gyro gain settings on the Spirit2 FBL and how they transfer to my Spektrum DX9 radio.
Could somebody please explain these Gyro settings in the Spirit2, and perhaps how they work and what settings I require in my DX9 to enable rescue, stability modes that are in line with my FBL. I understand to start with 50% Gyro but dont understand when I am to assign -50% in the Gyro radio settings and what switch I can assign these to on the DX9? I use switch B for Normal, FM 1 and FM2 attitudes. Many thanks in advance.


Top
 Profile  
 
PostPosted: Mon 23. May 2022 15:36:03 
Offline

Joined: Wed 21. Dec 2016 15:13:38
Posts: 199
Location: Germany
Hi Rob,
the only thing to know as a absolut beginner is tail gain - tail gain will be transfered from your spektrum transmitter to the spirit fbl as I have showed you in the other thread - for flying around you don't need a gain that's minus - for rescue, stabilisation, coaxial or others you can take an free channel to activate the settings -
In the stabi tab you can choose the wanted function as rescue, stabilisation, coaxial and so on....

You have two channels that are free Aux3 or Aux4 - In the digital switch setup you can adress an switch to an channel, you can take an momentary switch or an two positions switch - more is not needed - thats the easiest way of configuration, believe me -

For the head gain: Most the prests for headgains are very common -

Regards
Mattes61


Top
 Profile  
 
PostPosted: Mon 23. May 2022 15:44:12 
Offline

Joined: Wed 21. Dec 2016 15:13:38
Posts: 199
Location: Germany
If you dont want an extra channel you must do a mix that you get an minus value to get an activation of the function rescue, stabilisation, coaxial etc. - in the stabi tab you must choose the wanted reaction also -

Regards
Mattes61


Top
 Profile  
 
PostPosted: Tue 24. May 2022 4:48:23 
Offline

Joined: Wed 11. May 2022 3:54:26
Posts: 7
Hi Matte61,

Thank you, I get it now.. finally. I have set my Tail gains in the DX9 Gyro to 55% for all modes. I fly in FM 1 normally, so I will see how 55% translates to the tail in FM 1 & 2 and adjust from there.
Thank you once again for clarifying for me. Sorry I was a little slow on the uptake.
Take care mate.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .