Spirit System
https://www.spirit-system.com/phpBB3/

[SOLVED] Soft spoolup with YGE ESC
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=5206
Page 1 of 1

Author:  onit12 [ Wed 18. May 2022 12:08:08 ]
Post subject:  [SOLVED] Soft spoolup with YGE ESC

Hi,

is there anything I can do to get a smoother spoolup with YGE ESC, than that:
https://share.icloud.com/photos/098qBJw ... E5RtdiRCOA

I tried various "Spoolup Rate" settings in the Spirit governor and various settings in the YGE ESC, but it did not get better.

Thanks,
Tino

Author:  ZeXx86 [ Thu 19. May 2022 11:08:23 ]
Post subject:  Re: Soft spoolup with YGE ESC

Hi,

spoolup is handled by the ESC itself. There is Spoolup Power parameter which can improve it significantly.
Unfortunately when using external Governor and certain settings these smoothing procedures are bypassed on some ESCs.
Please decrease this parameter in the ESC.

If ESC is set correctly and you will still get a kick, you can decrease Spirit parameter called Spoolup Rampup. This is the only thing you can change and could help with external governor.

Author:  onit12 [ Tue 24. May 2022 11:50:28 ]
Post subject:  Re: Soft spoolup with YGE ESC

... increased Start-PWM in YGE ESC and now it`s much better.

Thanks, Tomas!

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/