It is currently Thu 28. Mar 2024 13:47:12

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 02. May 2022 2:18:49 
Offline

Joined: Mon 28. Mar 2022 16:07:07
Posts: 10
I'm waiting around for my Nimbus to ship so I decided to get the electronics as far as I can. I have a YGE esc and got the JST telemetry cable. I was up late and missed the part about pulling the red wire. I powered it all up. Today I pulled it and sent it to PIT as is is supposed to be rpm. So far, all telemetry works like it should from what I can tell. There is a warning in the manual and I'm worried I fried something.


Top
 Profile  
 
 Post subject: Re: Did I break my GT
PostPosted: Mon 02. May 2022 6:48:29 
Offline
User avatar

Joined: Tue 10. Mar 2020 14:36:22
Posts: 352
for sure Tomas will be the only one to be really able to answer this. but i guess there is no big risk you fried something: if it was the red bin of the BLUE (telemetry) cable of the YGE, this is only rpm signal, not + (plus) pin of the BEC.

_________________
cheers
Michael


Top
 Profile  
 
 Post subject: Re: Did I break my GT
PostPosted: Mon 02. May 2022 10:34:28 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
If you can get still 3.3V out of the JST ports then all is good. You can measure it at JST cable when it is connected with a multimeter across red and brown wires.
If you can measure the voltage, then it is all OK.
But even if no, then it mean that one of the LDO is burned, fortunately Spirit GT has two, while the second one is used for powering the electronics inside. It would be cheap repair in any case.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Did I break my GT
PostPosted: Tue 03. May 2022 0:54:52 
Offline

Joined: Mon 28. Mar 2022 16:07:07
Posts: 10
ZeXx86 wrote:
If you can get still 3.3V out of the JST ports then all is good. You can measure it at JST cable when it is connected with a multimeter across red and brown wires.
If you can measure the voltage, then it is all OK.
But even if no, then it mean that one of the LDO is burned, fortunately Spirit GT has two, while the second one is used for powering the electronics inside. It would be cheap repair in any case.


I really appreciate the detailed response. Multimeter shows 3.3 out of the FBL so whew. All good.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .