It is currently Tue 19. Mar 2024 11:34:28

All times are UTC + 1 hour





Post new topic Reply to topic  [ 1 post ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 11. May 2022 16:24:16 
Offline

Joined: Sat 20. Nov 2021 22:55:12
Posts: 8
Hi all,
I've setup Spirit FBLs on several helis without problems, but I have a couple now.
I'm seeing up a new XL Power Specter V2. Swash movements are correct to stick movements, but...
1. When I check for proper gyro compensation when holding the Heli up and pitching and rolling it, it does so properly in the roll axis, but pitch is reversed.
2. Rescue is all messed up. When rescue is enabled servo 2 goes almost full negative and #1 and #3 servos go negative but not as much as #2 resulting in a negative swash tilted back.
One other thing to note is the Spirit unit was in a terrible crash that resulted in a rekit (crash so bad it wasn't practical to repair so bought a new kit)
Any help will be appreciated .
Buzz
PS I just put a different Spirit unit on the Heli and loaded the .4ds file onto it and even the second FBL has the same problems, so the crash is not the problem.

Problem resolved. I had the position incorrect. It's on the right side, not flat upright.


Attachments:
Specter 5.11.22.4ds [255 Bytes]
Downloaded 11 times
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .